Instructions / Assembly

A1 - 18pcs B1 - 8pcs B3 - 12pcs B4 - 2pcs E - 1pc F - 4pcs

8x40mm 3,5x16mm 7x50mm 4x25mm Pull handle Shelf pin

B2 - 2pcs

4x40mm

Attention:

M - 2pcs

Hinge

Assembly Instructions - Cupboard HB-I

Allen key - 1pc

Screws for attaching of the cupboard to the frame of

the workbench.

Attention:

Storage cupboard is made from high quality laminated chipboard maximum resistance and long service life.

Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz

PAGE 1
Assembly Instructions - Cupboard HB-I A1 - 18pcs B1 - 8pcs B3 - 12pcs B4 - 2pcs E - 1pc F - 4pcs M - 2pcs 8x40mm 3,5x16mm 7x50mm 4x25mm Pull handle Shelf pin Hinge Allen key - 1pc B2 - 2pcs Screws for attaching of the cupboard to the frame of the workbench. 4x40mm Attention: Storage cupboard is made from high quality laminated chipboard maximum resistance and long service life. Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.
PAGE 2
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.
PAGE 3
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.
PAGE 4
„FRAME ASSEMBLY“ for using cupboard "HOBBY I" (HB-I) X = lower predrilled holes for stretchers if Assembly instruction: 1. Place base (5) Top Rail Support (4) Back Leg (3) and Front Leg with Bench dog holes (2) with dowel holes facing inward as shown (Fig.1). Attach the Base and Top Rail Support to the Front Leg with Bench Dog Holes (2) and Back Leg (3) using four Dowels (18) and Glue (20) for each. Hint: Do not fill up holes by glue. Smear dowels by glue and insert them to the dowels holes.