Manualshelf

Dimensions Guide

ManualsBrandsUnbranded ManualsBuilding Supplies2-in W x 120-in L x 2-in D Utility Angle 25 GA Galvanized Steel Metal Stud
1
Product Submittal Sheet
Tech Support: 888-437-3244 Sales: 800-543-7140
Engineering Services: 877-832-3206 clarkdietrich.com
L-Angle
Used in framing applications:
• Framing connections
• Corner intersections
• Half track connections
05.40.00 (Cold-Formed Metal Framing)
L-Angle
2” x 2” standard L-Angle
A standard 10’-0” long galvanized steel product, which is often field cut
to job site conditions for the ultimate use as a connector for framing
members. On interior framing it is often used to secure drywall at
corner intersections or along horizontal planes. It can also used as a
half track in chase and furred walls.
CD-200L-Angle © 03/19/15 ClarkDietrich Building Systems
!
Sustainability Credits:
For more details and LEED letters contact Technical Services at 888-437-3244 or visit www.clarkdietrich.com/LEED
LEED v4 MR Credit -- Building Product Disclosure and Optimization: EPD (1 point) - Sourcing of Raw Materials (1 point) - Material Ingredients (1 point) - Construction and
Demolition Waste Management (up to 2 points) - Innovation Credit (up to 2 points).
LEED 2009 Credit MR 2 & MR 4 -- ClarkDietrich's steel products are 100% recyclable and have a minimum recycled content of 34.2% (19.8% post-consumer and 14.4%
pre-consumer). If seeking a higher number to meet Credit MR 5, please contact us at (info@clarkdietrich.com / 888-437-3244)
Project Information Contractor Information Architect Information
Name: Name: Name:
Address: Contact: Contact:
Phone: Phone:
Fax: Fax:

Summary of content (1 pages)