SDS

Material Safety Data Sheet (MSDS)
“Wipe New Wipe-It”
Issue Date: September 10, 2013
Section 1 - Chemical Product & Company Identification
Product/Trade Name: “Wipe- New Wipe-It”
Product Type: Microfiber cloth pre-saturated with ≤10mL of Wipe New liquid
Distributor
Name: Wipe New, LLC
945 Seahawk Circle
Virginia Beach, VA 23452
Contact: [e-mail]
Phone:[phone]
Fax:[phone]
Product is registered with CHEMTREC
24HR Emergency Telephone: [phone]
International CHEMTREC:1-703-527-3887
Section 2 - Composition/Information on Ingredients
Single microfiber cloths saturated with ≤10mL of Wipe New liquid and packaged into
individual foil packs.
This liquid is a sealant that restores and permanently protects hard surfaces; the formulation is
proprietary but includes:
CAS 98-56-6 Benzene, 1-chloro-4-(trifluoromethyl)
CAS 540-88-5 tert-Butyl acetate
The primary ingredient in this product is considered to be hazardous by OSHA (as defined in the
OSHA Hazard Communication Standard 29 CFR 1910.1200).
Flashpoint >38C (100.4F) - <=60C (140F)
VOC % by weight: 0% (solvents are VOC exempt, including the state of CA)
Section 3 - Hazards Identification/Emergency Overview
Ingestion – May cause irritation which could result in nausea, vomiting and diarrhea.
Skin – Slightly irritating. May cause skin sensitization
Eyes – Moderately irritating (especially if rubbed into the eyes).
Inhalation - May cause irritation to the respiratory tract, as well as allergic respiratory reaction.
Section 4 - First Aid Measures
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the