Instructions / Assembly

STEP-BY-STEP INSTRUCTIONS:
A Small Connector 8
B Large Connector 4
C
Casters
4
D
Small Cross Bar
8
E
Medium Cross Bar
6
F
Large Cross Bar
6
G
Shelving
3
H
Roof Arch
2
I
Roof Connector
3
Style: 87D4 Greenhouse
Assembly Instructions
CONTENTS
1. Use the large connector (B) and insert
a large cross bar (F) in one end of the
connector and insert a medium cross bar
(E) into the other end. Connect each
end of the cross bars to a large
connector (F). Keep inserting the cross
bars to form the base. (Fig. 1)
2. Insert the casters (C) into the bottom
of the large connectors as shown. (Fig.
2)
3. Place the shelving rack (G) over the
cross bars.
4. Place the small cross bars (D) into the
top hole of the large connector (B).
Place the small connector (A) on the top
of the small cross bars (D).
5. Repeat step 1 using the large cross
bar (F) and medium cross bar (E).
6. Insert the remaining small cross bar
(D) and form the next layer.
7. Add the shelving rack (G) to all layers.
8. Insert the roof arch (H) to each side
of the shelving. Fig. 3
9. Insert the roof connector (I) rods to
the roof arch (H).
10. Pull the cover over the greenhouse.
Fig. 1
Fig. 2
Fig. 3