Instructions / Assembly

854 Day Bed
- 6 -
Step 2. Assemble the Frame
Fig.2
Ensuring that the pre-drilled holes are in the
correct position shown in Step 1, place front
support frame (B) upright and place a side to
side support (D-L) against it aligning the
threaded insert against the back of the front
support (B). Place bolt (I) through the
predrilled hole in the front support and thread
into the threaded insert. Tighten finger tight to
assist aligning other side to side supports.
Continue with the remaining 3 side to side
supports (D-S) across the front and finish on
the far end with the other side to side support
(D-L). Fig 2
. Ensuring that the pre-drilled holes are in the
correct position shown in Step 1, place back
support frame (B) upright and align a side to
side support (D) against it. Align the threaded
insert against the back of the back support (B).
Place bolt (I) through the predrilled hole in the
back support (B) and thread into the threaded
insert. Tighten finger tight to assist aligning
other side to side supports. Continue with the
remaining 3 side to side supports (D-S) across
the back and finish with the other side to side
(D-L). Once all side to side supports are in
place go back and fully tighten all on the front
and back. Fig 3