Instructions / Assembly

854 Day Bed
- 13 -
Step 6 Install Eye Bolts
Fig.16
Step 7 Install Buttons
Fig.17
Next place a washer on the back side of
the eyebolt (F). Thread on a nut and
thread it down until snug. With pliers
hold the eyebolt with opening down and
tighten the opposing nut with a wrench
until tight. Repeat for other 3 eyebolts
(F). Fig. 16
At this point go back and check all
fasteners and ensure that they are fully
tightened. Now use the buttons (G)
provided and insert into counter-bores
across the front and back. Push the
button in the counter-bore and then tap
in flush with a hammer. Fig. 17