Instructions / Assembly

854 Day Bed
- 12 -
Step 5 Assemble the Decking
Fig.14
Step 6 Install Eye Bolts
Fig.15 Opening shown up but install face down
Starting at the front of the Day
Bed, begin to drive the deck screws
(J)in the pre-drilled holes across
the front. Move from front to back
fully seating all screws. This step is
made much easier with a cordless
or electric drill but can be done
with a Philips hand screwdriver.
Fig. 14
Begin by inserting the eyebolt (F)
through the outer most pre-drilled
hole in the front/back support
frame (B). Place the opening of
the eyebolt down. Fig. 15