Instructions / Assembly
854 Day Bed
- 10 -
Step 4 Assemble the Back
Fig.10
Fig.11
Place a bolt (I)through the pre-
drilled hole in the side (C-L/C-R)
and thread into the threaded insert.
Once the bolt is in place and
partially threaded in, move to the
lower pre-drilled hole and thread a
bolt (I) through the lower pre-
drilled hole and partially thread in.
Fig 10
Repeat for the other side (C-L /C-R)
starting with the upper and moving to
the lower. At this point, go back
through all of the previous steps and
fully tighten all fasteners. Fig. 11