Instructions / Assembly

2
Congratulations! You’re the proud owner of a Gemmy Airblown
®
Inflatable. Please read over the
directions carefully before using your Gemmy Airblown
®
Inflatable.
CONTENTS
Airblown
®
Inflatable Unit 1 piece
Base Stakes 4 pieces
Tether Stakes 4 pieces
Nylon Tethers 4 pieces
Extra C-7 Light Bulb 1 piece
5 Amp, 125V Fuse 1 piece
GENERAL INSTRUCTIONS
1. Remove contents from packaging. Lay out deflated Airblown
®
Inflatable in a
clear area.
2. Locate four clips on the bottom of the fabric and attach to the plastic legs
(See illustration 1).
3. Turn unit upright. Make sure the air intake is clear of fabric or other obstruction
and zipper is fully closed.
4. Insert the base stakes through the plastic legs into the ground
(See illustration 2).
5. Plug into receptacle or other outlet device to inflate your Airblown
®
Inflatable.
6. Once fully inflated, clip the tethers to each of the nylon loops on the side of the
Airblown
®
Inflatable (See illustration 3).
illustration 1
illustration 2
illustration 3