Data Sheet

2
Rev. 2/21
The Reelmaster 3550-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
Reelmaster
®
3550-D Specifications
*
REELMASTER 3550-D, MODEL 03910
ENGINE
Kubota® 3-cylinder, liquid-cooled diesel engine. 24.8 hp (18.5 kW) @ 3000 RPM. Engine governed to 3220 RPM high idle (± 50 RPM), 1400 RPM low idle
(± 50 RPM). Displacement: 68.5 cu.in. (1123 cc). Peak torque: 57.2 lbs-ft @ 2200 RPM.
LUBRICATION
Pressurized lubrication system with 3.5 quarts (3.3 liters) capacity.
FUEL FILTER
10 micron spin-on filter with integral water separator.
COOLING
Aluminum side-by-side oil cooler/radiator. 8.5 fins per inch, wavy fin, non-louvered. 5.25 quart (4.9 liter) capacity.
FUEL TANK CAPACITY
7.5 gallons (28.3 liters), diesel fuel. Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).
TRACTION DRIVE
Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in
forward and reverse. 6 gallon (23 liter) hydraulic system capacity.
GROUND SPEED
0-10 mph (0-16.1 km/hr) forward transport; 0-7 mph (0-11.3 km/hr) mow; 0-3.5 mph (5.6 km/hr) reverse.
TIRES
Three (3) 22x12-12, 4-ply, no tread tires. 12 PSI recommended pressure.
MAIN FRAME
Formed steel, welded steel and steel tubing.
BRAKES
Hydrostatic service brake. Hand-operated parking brake.
STEERING
Power steering with tilt steering wheel.
GAUGES
Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug and charge indicator lights, and low engine oil pressure and high coolant temperature warning
lights (high temperature safety shut off).
CONTROLS
Foot operated controls: Forward and reverse traction pedal, mow/transport speed limiter. Hand operated on control panel: Parking brake lever, ignition switch,
engine throttle lever, LED work light switch, on/off switch for cutting units, joystick for cutting unit lift and lower. Other controls: Steering wheel tilt control, reel
speed control, backlap engagement lever.
ELECTRICAL & INTERLOCKS
Heavy-duty 12 V battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities.
Traction pedal neutral, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches.
REEL DRIVE
Hydraulic, open loop through oil cooler & filter. High efficiency pressure balanced gear type motors and pumps.
SEAT
Mechanical suspension standard.
DIMENSIONS
Height: 74" (188 cm) Length: 110” (279.4 cm) Wheelbase: 59.5” (151.1 cm) Operational Width: 94” (238.8 cm) Transport Width: 91” (213.1 cm)
WEIGHT
1,985 lbs. (900.38 kg) with (5) 18" 8-blade cutting units.
SAFETY
ROPS Standard. Capable of traversing a 25° slope in any direction on dry grass, while mowing.
CERTIFICATION
Complies with ANSI B71.4-2012 and CE requirements. EN ISO 5395.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.