Caution : You must read this before you proceed Table Label Picture Description QTY A Table Top 1 B Left Leg Frame 1 C Right Leg Frame 1 D "X" Iron Stretcher 1 1 OF 5
Label Picture Description QTY ① Nut 9 ② Wrench 1 Before Beginning Assembly : Overview Table Top (A) Left Leg Frame (B) Right Leg Frame (C) "X" Iron Stretcher (D) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Open the carton and place all parts on a clean, non-marring surface. Step 2 Place the Table Top(A) face down on the clean and soft surface. 2.1) Insert Left Leg Frame(B) into Table Top(A) as shown above. 2.2) Attach Left Leg Frame(B) to Table Top(A) using Nuts(①) with Wrench(②) as shown above. Do not fully tighten the Nuts. Step 3 Repeat Step 2, to attach Right Leg Frame(C) to Table Top(A). Do not fully tighten the Nuts.
Step 4 Attach the "X" Iron Stretcher(D) to Left Leg Frame(B) and Right Leg Frame(C) using the Nuts(①) with Wrench(②). Do not fully tighten the Nuts. Step 5 Stand the Table right way up. Place the Table on a LEVEL SURFACE to check for wobbles. If it wobbles, lift the table some 20cm to 30cm high from the ground. Keep your feet and toes well away from the drop zone. Drop the table freely and vertically with all four legs, hitting the ground, at the same time.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
