Use and Care Manual

PRODUCT TO GROUT AND CLEAN

www.litokol.it

APPLICATION DATA

Recommended adhesives for laying

mosaics

Cement foundations, plaster of Paris base, old tiles: Hyperflex K100

Wood, metal, fibreglass-reinforced plastic panelling: Litoelastic

Plexiglass: Primer 1217 + OTTOCOL M501 transparent

Glass: OTTOCOL M501 transparent

Recommended Trowel for the Adhesive

Trowel with 1/8” square notches, always follow manufacturers recommendations

Waiting time for grouting after adhesion

24 hours or recommended by the adhesive instructions

Mixing ratio

Component A: 100 parts in weight

Component B: 8.3 parts in weight

The two components are pre-dosed in their respective packs

Consistency of the mixture

Dough, soft paste mixture

Specific weight of the mixture

1.55 kg/l

Useable time of the mixture

About 1 hour at Temperature of 65-75°F

Application temperatures

Admissible: from 55°F to 85°F - Recommended: from 65 to 75°F

Can be walked on or used after

24 hours at T = 65-75°F

Working time

5 days at T = 55-65°F

Width of the joints

Up to 1/8” (3.175 mm)