Assembly Instructions

ITEM NO.: 77330
AGES 8 & UP
1. Never hold the engraver with the point toward a person's body or face. It is strictly
forbidden to etch on the body.
2. Always cover the work area with cardboard or another protective surface.
3. The paint is permanent and does not wash off.
4. Do not paint household fabrics, carpets or furniture.
5.The engraver is designed for multiple uses.
1. Read all the instructions carefully before beginning. Separate the chains from the tags.
2. Follow the instructions step by step to achieve the desired results. Consult the pictures.
3. Use the engraver as a professional art implement and not as a toy. Etch only on objects
you plan to decorate.
4. You must have adult supervision when using the engraver.
5. Keep the engraver and accessories in the kit out of reach of children under the age of 8.
6. Never clean the engraver with water.
Practicing:
The etching is permanent and cannot be erased.
Before you etch on the tags or other objects, we recommend practicing on a soft
drink can.
Before you begin,
you need to know the following important information:
General Instructions:
Figure 1 Figure 2
Figure 3
Etching:
1. Twist open the battery compartment cover. See Figure 1.
2. Insert 2 AA 1.5v batteries in to the battery compartment. Make sure you insert then in
the correct direction. See Figure 2.
3. Twist the battery compartment cover until it is closed.
See Figure 3.
4. Choose a tag and place it on the work area
that you've covered.
5. Hold the engraver like you hold a regular
writing implement. Press the operating button
with your finger. See Figure 4. The engraver will
begin working. To turn it off, release your finger from the operating button.
6. Lightly press the tip of the engraver on the tag, and slowly
move the tip to create an etching. See Figure 5
. Try to keep
your hand steady; don't press the tip too hard or it will stop
turning.
7. Besides the tags, you can etch on many objects and surfaces.
For example, you can etch on soft metal, wood and plastic. You
can also etch your name on your personal belongings.
IMPORTANT: Never etch on the body.
1. Place the tags you etched on the covered work area. Put
the paint in front of you. We recommend that you open the
lid of a paint container only while using that color, so the paint
doesn't dry. When you finish using one color, close the lid and
then open the lid of the next color you want to use.
2. Using the paintbrush, start painting your design. See
Figure 6. Put a plastic cup of water next to you and rinse
the paintbrush when changing colors. Note: If the color is
a bit dry or thick, you can thin it with a few drops of water.
3. Let the tags dry for at least 2 hours.
4. Thread the tags on the chains and wear the cool tags you've
made.
You can also use the engraver to create other custom made jewelry and decorations.
Figure 4
Figure 5
Figure 6
Painting:
Battery-Operated Engraver,
6 Metal Tags in Assorted-
Shapes (Drop,Star,Heart,
Flower,Oval and Pentagon),
6 Metal Chains,
8 Paint Pots,1 Paintbrush,
Includes: