GARDEN STAR GARDEN STAR Toll Free 877-425-1640 253-893-7014 Email: sales@marathonind.com Website: www.gardenstarcarts.
Parts Included: Tools Needed: 9 Crescent Wrench Gloves Eye-wear Step Nine: Align shims between tray and handle, matching curve of the shim to the handle. Insert long bolts through rubber gasket, tray, hole in shim and handle. Add washers and nylock nuts. Tighten with your fingers.
7 8 Step Seven: Place handle on legs. Bolts will be added on step 9. Step Eight: Place tray, aligning front holes first. Slide short bolts through rubber gaskets and front holes. Add small washers and nylock nuts.Tighten with fingers. 1 2 Step One: Put on your gloves and protective eye-wear. Slide axle through axle brackets on the frame. Step Two: With valve stem facing out, slide first wheel through axle. Add big washer and insert cotter pin through hole in axle.
3 Step Three: Repeat step 2 with the second wheel adding big washer and cotter pin, splitting both ends to keep it in place. 5 Step Five: Repeat step 4 on other leg, attaching it to the frame and securing with short bolt, small washer and nylock nut. Tighten with your fingers. Cotter Pin Big Washer Small Washer Nylock Nut 4 Step Four: Attach one leg to frame. Secure with short bolt, facing in. Add small washer and nylock nut. Tighten with your fingers.
3 Step Three: Repeat step 2 with the second wheel adding big washer and cotter pin, splitting both ends to keep it in place. 5 Step Five: Repeat step 4 on other leg, attaching it to the frame and securing with short bolt, small washer and nylock nut. Tighten with your fingers. Cotter Pin Big Washer Small Washer Nylock Nut 4 Step Four: Attach one leg to frame. Secure with short bolt, facing in. Add small washer and nylock nut. Tighten with your fingers.
7 8 Step Seven: Place handle on legs. Bolts will be added on step 9. Step Eight: Place tray, aligning front holes first. Slide short bolts through rubber gaskets and front holes. Add small washers and nylock nuts.Tighten with fingers. 1 2 Step One: Put on your gloves and protective eye-wear. Slide axle through axle brackets on the frame. Step Two: With valve stem facing out, slide first wheel through axle. Add big washer and insert cotter pin through hole in axle.
Parts Included: Tools Needed: 9 Crescent Wrench Gloves Eye-wear Step Nine: Align shims between tray and handle, matching curve of the shim to the handle. Insert long bolts through rubber gasket, tray, hole in shim and handle. Add washers and nylock nuts. Tighten with your fingers.
GARDEN STAR GARDEN STAR Toll Free 877-425-1640 253-893-7014 Email: sales@marathonind.com Website: www.gardenstarcarts.
