SDS

Page 4 of 9
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200)
Printing date 06/29/2015 Reviewed on 06/29/2015
Trade name: Slime Super Duty Tire Sealant
(Contd. of page 3)
41.0
9004-34-6 Cellulose
PEL (USA) Long-term value: 15* 5** mg/m³
*total dust **respirable fraction
REL (USA) Long-term value: 10* 5** mg/m³
*total dust **respirable fraction
TLV (USA) Long-term value: 10 mg/m³
EL (Canada) Long-term value: 10* 3** mg/m³
*total dust, **respirable fraction
EV (Canada) Long-term value: 10 mg/m³
paper fibre, total dust
LMPE (Mexico) Long-term value: 10 mg/m³
14808-60-7 Quartz (SiO2)
PEL (USA) see Quartz listing
REL (USA) Long-term value: 0.05* mg/m³
*respirable dust; See Pocket Guide App. A
TLV (USA) Long-term value: 0.025* mg/m³
*as respirable fraction
EL (Canada) Long-term value: 0.025 mg/m³
ACGIH A2; IARC 1
EV (Canada) Long-term value: 0.10* mg/m³
*respirable fraction
LMPE (Mexico) Long-term value: 0.025* mg/m³
A2, *fracción respirable
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
·
Engineering controls:
·
Breathing equipment:
Not required.
·
Protection of hands:
No chemical-protective gloves required.
Wear gloves for the protection against mechanical hazards according to OSHA and NIOSH rules.
·
Material of gloves
Strong gloves
·
Eye protection:
Not required.
·
Body protection:
Boots
Not required.
(Contd. on page 5)