Specification

Model Numbers
---------- Pipe sizes -----------
Models
Inlets Outlets

7-900A*
1 1/2"
(38mm)
1 1/2"
(38mm)

7-1000A*
1 1/2"
(38mm)
2"
(51mm)
*The 7 Series model numbers above replace the 6 Series.
TempControl®
Feature Highlights
■ TempControl thermostatic controller
▷ Check stops
▷ Removable/replaceable cartridge
▷ Stainless steel piston
▷ ermal motor with Turbulator™
■ Volume control shut-o valve
■ Bimetal dial thermometer
▷ Range 20°-240°F (-7°- 116°C)
▷ 3 inch (76 mm) face
■ Standard brass pipes, ttings and unions
■ Standard rough bronze nish
■ TempControl valves are certied to:
▷ ASME A112.18.1/CSA B125.1
▷ CSA B125.3
▷ ASSE 1017
▷ CA 116875 (AB 1953)
▷ NSF 372
▷ US S.3874
Location:
Specification Submittal
Thermostatic Mixing Valve
and Piping, A Series
Warranty
■ 5 years - for commercial installations
Finish Options / Modifications
Append appropriate -sux to model number

-NI
Rough nickel nish

-P
Valves and piping with a polished
chrome highlight nish
Options / Modifications
Append appropriate -sux to model number

-ASB
Factory assembled and tested
(with type L copper tubing)

-V
Vacuum breaker (not shown)

-W
Wall mounting bracket
Note: Finish options cannot be used in conjunction with
suffix ASB.
Note: Standard valve and piping finish is rough bronze,
brass or copper. Factory assembled and tested units are
available in rough bronze, satin spray and satin spray
with polished highlight finish with type L copper tubing.