Product Literature

690 Series

GOLF ROTORS

Water Management Highlight

690

696 2-SPEED MODELS

Used in single row applications these sprinklers operate at a slower speed over the 60

degree non-overlap area and a faster speed over the 120 degree overlapped areas to

provide a balanced application rate.

698 2-SPEED MODELS

Used in double row applications these sprinklers operate at a slower speed over the 180

degree non-overlap area and a faster speed over the 180 degree overlapped areas to

provide a balanced application rate.

FIXED ARC DRIVES

Nine ﬁxed arc drive assemblies ensure positive retention of the coverage area with

no arc drift.

ARTIFICIAL PLAYING SURFACES

Radius and ﬂow capabilities are perfect for cooling and rinsing artiﬁcial playing surfaces

such as football ﬁeld.

ELECTRIC VALVE IN HEAD MODELS

Electric valve in head models provide individual head control that ensures run times can

match differing soil, turf and terrain watering requirements, pressure regulation to ensure

all nozzles perform at the same pressure and manual ON-OFF-Auto control at the head.

For nearly 40 years the 690 Series has set the standard for durability and

reliability in both golf and commercial applications. Extremely rugged, the

690 series is constructed of brass, stainless steel and engineering

plastics for unmatched performance in the most demanding environments.

Features & Benets

Two 2-speed models provide improved performance and lower the system cost for

larger radius applications. 696 models for single row applications and 698 models for

double row applications provide a slower speed in the non-overlap areas and a faster

speed in the overlap areas to provide a more balanced precipitation rate than

traditional full circle sprinklers in these application.

60° Slow Side

120° Fast Side

180° Fast Side

180°

Slow

Side

PAGE 1
690 Series GOLF ROTORS For nearly 40 years the 690 Series has set the standard for durability and reliability in both golf and commercial applications. Extremely rugged, the 690 series is constructed of brass, stainless steel and engineering plastics for unmatched performance in the most demanding environments. Water Management Highlight Two 2-speed models provide improved performance and lower the system cost for larger radius applications.
PAGE 2
690 Series Operating Specifications • Inlet: 1 ½” NPT • Radius: 87’ – 108’ • Flow Rate: 51.0 – 82.2 GPM • Recommended Operating Pressure Range: 80-100 psi Maximum pressure: 150 psi Minimum pressure: 40 psi • Electric Valve-In-Head Solenoid: 24V ac, 50/60 Hz - Inrush: 60 Hz, 0.30 Amps - Holding: 60 Hz, 0.20 Amps • Check-O-Matic: Maintains 37’ of elevation Dimensions • Body diameter: 10” • Body height: 16” • Weight: 5.6 lbs.