Specification

SWIVEL BASE
DESCRIPTION:
Swivel Base’s are a combination of a Flange and Swivel Socket to let you have a secure
base that can be adjusted with the ability to change directions 180-degrees. The wide
base is has two pre-drilled holes for securing the fitting to a solid platform and the
pipe end fits securely to the swivel connection point. This point comes with a screw for
securing the pipe to the fitting.

FEATURES:
PART # SIZING
INSTALLATION
SCREW (IN X MM)
a b FITS PIPE OD (IN) WEIGHT (LBS)
676-904HC 3/4in 1/4X12.5 1.26 2.3 1.050 1.29
676-906HC 1-1/4in 3/8 x 12.7 1.26 2.72 1.660 1.78
676-904HC | 3/4in
676-906HC | 1-1/4in
· Zinc coating for corrosion resistance
· Galvanized steel construction for durable
performance
· Easy installation and removal, no permanent
connections
· No special tools needed
· Use an Allen Wrench for connections
· Able to operate in temperatures ranging from
-20°C to 300°C
Distributed by B&K LLC | 8285 Tournament Drive, Suite 150 | Memphis, TN 38125
[phone] | [phone] | [phone] | www.bkproducts.com
· Materials meets ASTM A-197 Standard
· Not for Plumbing Applications
· Not for Scaolding Applications
· Made to fit with SteelTek Pipe
CERTIFICATIONS & SAFETY:
California Prop 65 Warning:
This product contains chemicals including lead
known to the State of California to cause cancer
and birth defects or other reproductive harm. Wash
hands after use.
© 2017 B&K LLC
www.steel-tek.com
STS-001
04/27/17
DIMENSIONAL DATA: