Data Sheet

ManualsBrandsUnbranded ManualsAerators64"-98" ProCore® 864/1298 Series Turf Aerator

Rev. 2/21

ProCore

864 & 1298 Specifications

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

PROCORE 864, MODEL 09715 PROCORE 1298, MODEL 09716

AERATION WIDTH

64 inches / 163 cm 98 inches / 249 cm

AERATION DEPTH

5 inches / 12.7 cm maximum** 5 inches / 12.7 cm maximum**

TRACTOR SIZE

30 HP @ PTO minimum

35 HP @ PTO recommended

40 HP @ PTO minimum

50 HP @ PTO recommended

TRACTOR CONNECTION

3-point Category 1 or 2 3-point Category 2

TRACTOR PTO

540 RPM 540 RPM

FORWARD HOLE SPACING

(TRACTOR DEPENDENT)

Variable up to 4.5 inches / 11.4 cm Variable up to 4.5 inches / 11.4 cm

LATERAL HOLE SPACING (TINE

HEAD DEPENDENT)

1.3 - 2.6 inches / 3.3 - 6.6 cm 1.3 - 2.6 inches / 3.3 - 6.6 cm

NUMBER OF TINE HEADS

8 12

OVERALL WIDTH

67 inches / 170 cm 101 inches / 256.5 cm

HEIGHT

38.5 inches / 98 cm 38.5 inches / 98 cm

LENGTH

35 inches / 89 cm 35 inches / 89 cm

WEIGHT

1575 lbs / 714 kg 2300 lbs / 1043 kg

CERTIFICATION

ANSI B71.4-2017, CE and EU machinery directives

WARRANTY

Two-year or 500-hour limited warranty. Refer to Operator’s Manual for further details

PRODUCTIVITY RATES

Tractor Speed Spacing ProCore 864 ProCore 1298

mph (km/hr) Forward Hole Spacing sq. ft. / hr. (sq. m / hr.) sq. ft. / hr. (sq. m / hr.)

0.5 (0.8) 1.0” (25 mm) 14,400 (1,338) 22,050 (2,049)

0.8 (1.2) 1.5” (38 mm) 21,600 (2,007) 33,075 (3,073)

1.0 (1.6) 2.0” (51 mm) 28,800 (2,676) 44,100 (4,097)

1.3 (2.1) 2.5” (64 mm) 36,000 (3,345) 55,125 (5,121)

1.5 (2.5) 3.0” (76 mm) 43,200 (4,013) 66,150 (6,146)

1.8 (2.9) 3.5” (89 mm) 50,400 (4,682) 77,175 (7,170)

2.0 (3.3) 4.0” (102 mm) 57,600 (5,351) 88,200 (8,194)

2.3 (3.7) 4.5” (114 mm) 64,800 (6,020) 99,225 (9,218)

** Hole depths greater than 4 inches can only be achieved with 6.5 inch length tines and with turf holders removed. Some degradation in hole quality may be observed in this configuration.

TINE HEADS

Model Tine Heads: Lateral Spacing Mount Diameter

09737 Mini Tine Head (1 row of 6) 1.3” 3/8” (10 mm)

09736 Mini Tine Head (2 rows of 5) 1.6” 3/8” (10 mm)

09739 Needle Tine Head 1.6” 5 mm or 8 mm

09794 3 Tine Head 2.6” 3/4” (19 mm)

09796 4 Tine Head 2.0” 3/4” (19 mm)

09797 3 Tine Head HD 2.6” 7/8” (22 mm)

09719 QuickChange® 4-Tine 2.0" (5.1 cm) 3/4" (19 mm) or 7/8" (22 mm)