User manual

ManualsBrandsUnbranded ManualsSocket StripsSocket strip (+ switch) 4 x White PG connector

These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,

D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁ lming,

or the capture in electronic data processing systems require the prior written approval by the editor.

Reprinting, also in part, is prohibited.

These operating instructions represent the technical status at the time of printing. Changes in

technology and equipment reserved.

Getting Started, Use

Without fail, read and observe the section “Safety instructions”.

•

Plug the earthed mains plug of the outlet strip into a regular earthed mains socket (wall socket).

• Place the outlet strip in an appropriate place. Place the cables in such a way that nobody

can trip over them. Protect valuable furniture surfaces by using a suitable underlay to prevent

scratches.

• Connect the consumer loads to the sockets of the outlet strip.

If angle plugs are used, then these should be plugged into the sockets such that the

cables are not on the lever side.

This approach keeps the levers free and allows their effortless operation.

• The sockets are turned on or off by pressing the large, round on/off switch.

A LED in the on/off switch indicates whether the sockets are activated (LED lights

up) or not (LED is off).

• Using the lever of the unplug assist the plugs connected to the sockets can be easily un-

plugged.

Press the corresponding lever by hand, so as to pull out the plug in the relevant socket from

above and remove it without any great effort.

Caution!

Do not step on the lever of the unplug assist! Do not press the lever using any object!

Sudden application of force may not only damage the lever, but also the mechanics

in the outlet strip.

Operate the lever only by hand.

Maintenance and care

• The product does not require maintenance. The product contains no parts that require servic-

ing. Therefore, do not open/dismantle it. Maintenance or repair may only be performed by

qualiﬁ ed personnel or a specialised repair shop.

• Switch off the outlet strip and disconnect it from the mains voltage before cleaning. Discon-

nect the earthed mains plug from the mains socket (wall socket). Also disconnect all con-

nected consumer loads from the outlet strip.

• Use a clean, dry, soft cloth for cleaning.

•

Dust can easily be removed using a clean, soft and long-bristled brush and a vacuum cleaner.

Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions, since

these could damage the housing or even impair operation.

Disposal

Dispose of an unserviceable product in accordance with the relevant statutory regu-

lations.

Technical data

Connection data ...........................230 V/AC, 16 A, max. 3680 W

Earthed sockets ............................4, with integrated child safety device

On/off switch .................................2pin (N/L)

Cable type ....................................H05VV-F, 3 x 1.5 mm²

Cable length .................................1.5 m

Dimensions ...................................275 x 110 x 65 mm (L x W x H)

Weight ..........................................approx. 645 g (incl. battery)