Installation Guide

MODEL: 60565
ASSEMBLY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
TROUBLE SHOOTING
1.) If your LED light string is not functioning properly or losing power mid-cycle, then ensure the
solar panel is positioned in direct sunlight. Your solar panel will need to collect about 6 hours of
sunlight to function throughout a full cycle.
2.) Although the battery inside your seriously solar panel is designed for maximum longevity,
Overtime performance will drop - replacing the battery will correct this issue.
important notes:
1.) The
LED light string
will turn on automatically every night
if the switch is in "on" position
.
2.) Although there may be some initial charge in battery, we recommend fully charging it before first
use. Turn off the led light and leave the solar panel in good sunlight for 6 hours to ensure the battery is
fully charged.
3.) To maximize solar energy intake, the solar panel may be cleaned periodically with a soft rag and
water, do not use chemical solvents.
IF NECESSARY, PLEASE SEE THE FOLLOWING STEPS TO REPLACE THE
RECHARGEABLE BATTERY.
1.) Detach the stake assembly from solar panel.
2.) Remove (4) screws from back of solar panel with screwdriver (not included).
3.) Remove the old battery and replace with a new rechargeable battery (400MAH, 3.2V,
LI-ION-14500), replace the cover and secure with (4) screws.
4.) Attach stake assembly to back of the solar panel.