Installation Guide

MODEL: 60565
ASSEMBLY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH
PRIOR TO ASSEMBLY.
Assembly Time: 5 Minutes.
UNPACK THE SOLAR LED LIGHT STRING
The following parts should be included in the
box: LED light string, (1) solar panel, (1) tube
and (1) stake.
PANEL ASSEMBLY AND INSTALLATION
1.) Join tube and stake together as shown below.
2.) Attach stake assembly to back of the solar
panel.
4.) Insert the solar panel into the ground in a
sunny area.
3.) Hang the light string to the position as you
desired.
5.) Slide the switch to "OFF" position for
charging, once charged for around 6 hours,
slide the switch to "ON" position, your new
solar LED light string is ready for use.
Note: The service life of battery is 500 days.