Specification

Available Sizes (Sized for 4* x 8*)

Square Edge 3*-11

⁄8( (1.216 m) x 7*-11

⁄8( (2.435 m)

Tongue & Groove 3*-11

⁄2( (1.206 m) x 7*-11

⁄8( (2.435 m)

Building Code Performance Categories, Panel Thickness

• 19/32 CAT, 0.578( (14.68 mm)

• 23/32 CAT, 0.703( (17.85 mm)

• 1-1/8 CAT, 1.091( (27.71 mm)

Specifications

Length/Width Tolerance +0, –

⁄16( (+0, –1.6 mm)

Straightness Tolerance ±

⁄16( (±1.6 mm)

Squareness Tolerance ±

⁄8( (±3.2 mm)

Primary Species Southern Yellow Pine

Testing Agency APA

-The Engineered Wood Association

Classification Exposure 1 – OSB suitable for uses not permanently exposed to the weather. Panels classified

as Exposure 1 are intended to resist the effects of mositure on structural performance as may

occur due to construction delays, or other conditions of similar severity.

Code Fire Classification Class III or C

Flame Spread Rating 76-200, smoke-developed index <450

Building Code Compliance PS 1-09

Other Information

Forestry Certification Plytanium plywood Sturd-I-Floor panels are made from wood

sourced through a system that is third-party certified to the

Sustainable Forestry Initiative

procurement standard.

Green Building Programs See our Plytanium plywood Sustainability Fact Sheet available at

www.builditbetter.com for more information on potential point

contributions towards specific green building programs.

NAHB Green Approved Plytanium plywood has been “Green Approved” by the NAHB

Research Center, which means you can be assured that Plytanium

plywood complies with specific green practice criteria in the

National Green Building Standard. See our product listing on

www.GreenApprovedProducts.com for more information.

Plytanium

plywood Sturd-I-Floor

panels are ideal for residential and light commercial construction, and provide outstanding

performance for sub-floors. They add proven performance and durability to new homes, room additions and renovations.

Specifications–Sturd-I-Floor

PAGE 1
Specifications–Sturd-I-Floor® Plytanium® plywood Sturd-I-Floor® panels are ideal for residential and light commercial construction, and provide outstanding performance for sub-floors. They add proven performance and durability to new homes, room additions and renovations. Available Sizes (Sized for 4* x 8*) Square Edge 3*-117⁄8( (1.216 m) x 7*-117⁄8( (2.435 m) Tongue & Groove 3*-111⁄2( (1.206 m) x 7*-117⁄8( (2.435 m) Building Code Performance Categories, Panel Thickness • 19/32 CAT, 0.578( (14.
PAGE 2
Specifications–Sturd-I-Floor® Product Warranty Plytanium® plywood is covered by a Lifetime Limited Warranty. For terms and conditions, please refer to our Lifetime Limited Warranty available at www.builditbetter.com.