60506 ASSEMBLY INSTRUCTIONS MODEL: READ AND SAVE THESE INSTRUCTIONS 3.) Slide the LED light body through the bottom of your deck. READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY. Assembly Time: 20 Minutes. UNPACK THE SOLAR LED LIGHT STRING The following parts should be included in your solar light kits; (10) Solar LED Lights, (1) Solar panel, (1) Stake, (1) Countersink Spade Bit. TOOLS A drill will be required for deck or hard surface installation. DECK INSTALLATION 1.
60506 ASSEMBLY INSTRUCTIONS MODEL: READ AND SAVE THESE INSTRUCTIONS 3.) Insert the stake of solar panel into the ground in a sunny area. PANEL ASSEMBLY AND INSTALLATION 1.) Push stake into tube as shown below. Note: You can adjust the angle of the solar panel. 4.) Once charged for 6~8 hours, your LED Light String is ready for use. Slide the switch on the back of the solar panel to turn the lights on. 2.) Join the connectors and screw the cap tightly together. 5.
60506 ASSEMBLY INSTRUCTIONS MODEL: READ AND SAVE THESE INSTRUCTIONS TROUBLE SHOOTING: 1.) If your Solar LED Light is not functioning properly or losing power mid-cycle, then ensure the solar panel is positioned in direct sunlight. Your solar panel will need to collect between 6 ~ 8 hours of sunlight to function throughout a full cycle. 2.) Check your connections to the solar panel - a loose or improperly connected cable will cause the LED Light String to malfunction. 3.
