Data Sheet

7
Rev. 2/21
Groundsmaster
®
360 Attachments Specifications
*
Aera-vator Universal Shaft System Frame**
WEIGHT (FRAME ONLY)
†
900 lbs (408 kg)
WORKING WIDTH
60" (152.4 cm)
CENTER DRIVE GEARBOX
1:1 Right Angle
END DRIVE
4 “BX” 46 Belts (Each End)
TINE VIBRATION FREQUENCY
@540 PTO RPM = 800 Cycles/Min
HEAVY DUTY LIFT/TRAIL HITCH
3 ft (91.4 cm) Turn Radius (approx.)
DRIVE LINE
1.375” (3.5 cm) Spline w/Safety Shield
FINISH
Black Polyurethane w/Red Trim
†
Add appropriate shaft weight (selected) to AERA-vator weight
†
Add appropriate shaft weight (selected) to AERA-vator weight
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes
only. Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for
details on all warranties.
** Manufactured by First Products. Aeravator Shaft System Frame and Shaft Accessories. The Toro Company does not manufacture
or sell this product, nor does Toro guarantee these accessories in any manner whatsoever.
*** Manufactured by Vrisimo. Attachment model 60MM. The Toro Company does not manufacture or sell the flail,
nor does Toro guarantee these accessories in any manner whatsoever.
**** Manufactured by BOSS®. The Toro Company does not manufacture or sell the spreader, nor does Toro guarantee these
accessories in any manner whatsoever.
AERA-VATOR SHAFTS
Aera-vator Shaft Coring Shaft Multi-Tine Shaft Aera-Slicer Shaft
SHAFT ACCESSORY USE
Vibrating tines loosen dry soil by
fracturing - no holes, no plugs, no
pre-irrigation
Non-PTO, powered by 3-point tow,
.75” (1.9 cm) cores
Less aggressive vibrating tines,
great for overseeding without
surface disruption
Compaction relief with minimal
surface disruption during hot
summer months
WIDTH
60" (152.4 cm)
SHAFT WEIGHT
†
236 lbs (107 kg) 145 lbs (65.8 kg) 245 lbs (111 kg) 155 lbs (70.3 kg)
SIDE-TO-SIDE TINE TRAVEL
1.375” (3.5 cm) N/A .5" (1.27 cm)
.625" (1.6 cm) vibration blade travel
(vertical)
CORING DEPTH
N/A Up to 4.5" (11.4 cm) N/A N/A
VIBRATING DEPTH
3.75" (9.5 cm) N/A Up to 2” (5 cm) deep 4.5" (11.4 cm) full depth
AERATION DENSITY (APPROX)
9 Holes per sq ft (.093 sq. m) 5-6 Holes per sq. ft (.093 sq. m) 55 Holes per sq ft (.093 sq. m) 6-7 Slits per sq ft (.093 sq. m)
BOSS® Salt Spreader, Model TGS 300****
HOPPER CAPACITY
3 cu ft/200 lbs (.08 cu m/91 kg)
HOPPER DIMENSIONS
217⁄8"H X 29"W X 15"D (53 cm x 74 cm x 38 cm)
SPREADER WEIGHT
70 lb. (31 kg) plus mount
FEED MECHANISM
†
Internal auger w/material saving brush and adjustable
drop-feed gate
VIBRATOR KIT
Not recommended
MOTOR
High-torque/12-volt DC
SPINNER
12" (31 cm) poly
SPREAD WIDTH
4–30 feet (1–9 meters)
MATERIAL DEFLECTOR
Adjustable poly deflector
RECEIVER HITCH
See Toro Distributor for details on mounting.
CONTROL
Variable speed control with blast feature and overload
protection
BOSS® Salt Spreader, Model Exact Path 2.5****
EMPTY WEIGHT/FULL WEIGHT
Empty 140 lbs. (63.5 kg) / Full 365 lbs. (165.5 kg)
SPREADER DIMENSIONS
21.75"H x 47.375"W x 13.875"D (55.2 cm x 120.3 cm
x 35.2 cm)
HOPPER LENGTH/WIDTH
12.125” (30.7 cm) L, 47.375” (120.3 cm)
SPREADING WIDTH
40” (101.6 cm)
CONTROLLER
Variable speed
FEED GATE/DRUM/BAFFLE
Feed gate is 8-way adjustable; drum is stainless steel;
baffle is polyurethane
FRAME
Stainless steel construction
HOPPER CONSTRUCTION
14-gauge, stainless steel construction
MOTOR
12-volt
ATTACHMENT SYSTEM
2” (5.08 cm) receiver, 3-point, UTV
CAPACITY VOLUME
2.5 square feet (70.79 liters)
TOP SCREEN/COVER
Top screen standard; cover standard, hard poly
DRUM GUARD/BED SHIELD
Standard, stainless steel
†
Designed to spread dry, free-flowing material (i.e., salt, deicers, etc.).