Data Sheet

2
Rev. 2/21
The Groundsmaster 360 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Groundsmaster
®
360 Specifications
*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual
products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
**Dependent on operator and turf conditions. Assume 85% efficiency for turns and overlap; 8 mph (12.9 km/hr) mow speed.
GROUNDSMASTER 360, MODEL 31200 GROUNDSMASTER 360 – CAB, MODEL 31202
ENGINE
Yanmar; 3-cylinder common-rail, liquid-cooled, diesel with EGR and diesel particulate filter (DPF), 36.8 hp (27.4 kW) rated @ 3000 rpm, 80 ft-lbs @ 1950 rpm, High idle
3000 rpm, Low idle 1400 rpm, displacement 1642 cc. Remote mounted Donaldson air filter, external spin-on oil filter and high flow fixed fan. EPA Tier IV Final Compliant.
FUEL CAPACITY
13.5 gallons (51.1 liters) diesel. Biodiesel Ready for use up to B-20 (20% biodiesel and 80% diesel blend).
TRACTION DRIVE
Independent high-torque, low-speed wheel motors with 335 cc displacement. CrossTrax® drive system utilizing series parallel hydraulic drive circuit with full time
forward and reverse 4WD. Patent pending.
TIRES
Front & Rear: (All 4 tires and wheels are the same part number) 23/10.5x12 6 ply pneumatic tubeless, demountable and interchangeable. Tread Kenda K500 TL similar to “Toro Tuff Trac”.
AIR CLEANER
Dry, replaceable primary element.
INSTRUMENTATION
InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, and electrical system diagnostics. Indicates coolant temp, intake temperature, low
oil pressure, alternator, engine hours, engine rpm, hydraulic oil temperature, voltage
CONTROLS
Ignition switch, throttle switch, foot-operated traction pedal with mowing speed control stop, service brake with parking brake latch, switch for raising and lowering cutting unit.
GROUND SPEED
Transport and Mow: Forward 0-11 mph (0-17.7 km/h), variable. Reverse 0-6 mph (0-9.7 km/h), variable.
RADIATOR
Rear mount, cross flow, 6.5 fins per 1” (25 mm), 8 quart (7.6 liter) capacity
MAIN FRAME
Rectangular structured steel tube and high strength steel plate welded construction.
BRAKES
Service Brake: Foot pedal with dynamic braking through hydrostatic transmission. Parking Brake: foot actuated brake lever with two 8” (20.3 cm) diameter drum
brakes mounted on the rear wheel motors.
STEERING
Quad Steer™ all-wheel steer with four wheel Ackermann steering. Two turns Lock to Lock controlled via steering wheel and automatic synchronizing hydraulic cylinders.
4WD models have rear wheel steer lock out position, providing front two wheel steering (2WS).
ELECTRICAL
12-volt, 55 amp internal regulated alternator/generator charging @ 3150 rpm. Battery: BCI Group No. 26, 540 cold cranking amps @ 0° F (-17.78° C).
INTERLOCKS
Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, engine stops. If operator leaves the seat with the unit out of
neutral, engine stops. Engine stops if parking brake engaged and traction pedal not in neutral. High temp (PTO shuts down but engine remains running), Over temp (engine shuts down).
SEAT
High back cushion vinyl seat with drain hole, deluxe low profile mechanical
suspension, 4” (10 cm) fore-aft travel with an additional 44 mm (1.75”) foreword
adjustment, armrests standard, retractable seat belt, lateral shock absorption.
Grammer low profile air ride suspension, cloth cushions, retractable seat belt,
lateral shock absorption.
OPERATOR AREA
Operator platform with isolated operator seat (all models), 12-volt power outlet, cup holder.
HYDRAULICS/COOLING
3 gallon (11.4 liter) capacity, suction spin-on filter mounted to transmission, oil cooler 6.5” x 17”x 3.5” (16.5 cm x 43.2 cm x 8.9 cm). Bar and Plate Core; 6.5 serpentine fins per 1” (25 mm).
PTO CLUTCH
Hydraulically actuated wet multi disc clutch.
ROLL-OVER PROTECTION
2-post standard foldable ROPS certified per ISO/DIS 21299.2 specifications Safety cab is ROPS certified
ALL-SEASON SAFETY CAB
Optional, ROPS certified heat-only cab only.
Factory installed, ROPS certified, pressurized cab with AC and heat. Tempered
curved windshield, opening side window, opening rear window, emergency exit:
front, rear or side window, tinted side and rear glass (50% tint); front wiper/
washer; interior mirror and exterior side mirrors; SMV sign; interior dome light.
Road light kit and work light kit sold separately. All glass windows meets
ANSI Z-26.1999 and ECE R43
FUEL ECONOMY
1.1 gallons/hr (4.8 litres/h)**
SAFETY
Complies with American National Standards Institute (ANSI B71.4-2004)
CERTIFICATION
Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meet C-Tick
2004/108/EC/(EMC). Certified to meet the ISO EN5395 Machinery Directive requirement.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
DIMENSIONS & WEIGHT WITH CUTTING DECKS (Cutting Decks Sold Separately)
HEIGHT ROPS UP
80” (202 cm) 88.5” (225 cm)
OVERALL LENGTH
108.5” (276 cm) / 117” (297 cm) with front Quick Attach System™ (QAS) only
OVERALL WIDTH
78” (198 cm) [72” (183 cm) base deck] / 75” (191 cm) [72” (183 cm) side discharge deck] / 55” (140 cm) wheel to wheel
WHEELBASE
61” (155 cm)
EST. SHIPPING WEIGHT
2540 lbs. (1152 kg) without cutting unit 3163 lbs (1435 kg) without cutting unit