SDS

ManualsBrandsUnbranded ManualsConcrete Floor Paint5 gal. Preserva Crete Concrete Sealer

PRESERVA

CRETE (Confidential) SDS

PAGE 1 OF 7

SAFETY DATA SHEET

Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS 2015 (HPR-GHS) and the Global Harmonization Standard

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

PRODUCT IDENTIFIER

TRADE NAME (AS LABELED): PRESERVA

CRETE

CHEMICAL NAME/CLASS: Aqueous Silicon Emulsion

SYNONYMS: None

PRODUCT USE: Sealing Concrete

SUPPLIER OF THE SAFETY DATA SHEET

U.S. SUPPLIER/MANUFACTURER'S NAME: Preserva Products Ltd.

ADDRESS: 12860 Earhart Avenue

Auburn, CA 95602

EMERGENCY PHONE: 800-797-2537 M-Th, 9am-4pm PST

BUSINESS PHONE: 800-797-2537 M-Th, 9 am-4pm PST

EMAIL ADDRESS FOR PRODUCT INFORMATION: info@preservaproducts.com

DATE OF PREPARATION: September 04, 2018

NOTE: ALL United States Occupational Safety and Health Administration Standard (29 CFR 1910.1200), U.S. State equivalent Standards, Canadian WHMIS 2015 and the Global Harmonization required

information is included in appropriate sections based on the Global Harmonization Standard format. This product has been classified in accordance with the hazard criteria of the countries listed above and the

SDS contains all the information required by the Canadian WHMIS 2015 [HPR-GHS], the Global Harmonization Standard and OSHA 1910.120.

2. HAZARD IDENTIFICATION

GLOBAL HARMONIZATION LABELING AND CLASSIFICATION: Classified in accordance with Global Harmonization Standard

under U.S. OSHA Hazard Communication Standard, and the Canadian WHMIS HPR-GHS 2015.

Classification: Skin Irritation Cat. 2, Eye Irritation Cat. 2A, Skin Irritation Cat. 2, STOT (Inhalation-Respiratory Irritation) SE Cat. 3

Signal Word: Warning Hazard Statement Codes: H315, H319, H335

Precautionary Statement Codes: P264, P261, P271, P280, P302 + P352, P332 + P313, P321, P363 + P364, P305 + P351 + P338, P337 + P313, P304 +

P340, P312, P403 + P233, P405, P501

Hazard Symbols/Pictograms: GHS07

See Section 16 for full text Hazard and Precautionary Statements

EMERGENCY OVERVIEW: Product Description: This product is an off-white liquid with a mild ammoniacal odor. Health

Hazards: Inhalation of vapors, mists or sprays may cause irritation. Eye contact can cause moderate to severe irritation. Skin contact

may be irritating, especially if contact is prolonged. Ingestion may be harmful. Flammability Hazards: This product is not flammable

or combustible. If involved in a fire, this product will release smoke, acrid vapors and toxic gases (e.g., carbon, nitrogen and silicone

oxides, phenol, ethylene glycol, formaldehyde, formic acid, glyoxal, dioxalane and ammonia). Reactivity Hazards: This product is

not reactive. Environmental Hazards: Components of this product can cause long-term harm to aquatic organisms. Release of this

product to the environment may cause harm to plants and animals. Emergency Response Considerations: Emergency responders

must wear proper personal protective equipment (and have appropriate fire protection) suitable for the situation to which they are

responding.

3. COMPOSITION and INFORMATION ON INGREDIENTS

CHEMICAL NAME

CAS #

% w/w

LABEL ELEMENTS

GHS Classification under U.S. OSHA Hazard Communication Standard and Canadian WHMIS 2015

Hazard Statement Codes

Silicon Emulsion

Containing the following:

6.25%

MFG CLASSIFICATION:

Classification: Skin Irritation Cat. 2, Eye Damage Cat. 1A, Aquatic Chronic Toxicity Cat. 3

Hazard Statement Codes: H315, H318, H413

Trimethyl Nonyl

Trioxylate

60828-78-6

(0.6-1.9%)

NOTIFIED EU ECHA CLASSIFICATION:

Classification: Skin Irritation Cat. 2, Eye Damage Cat. 1A, Aquatic Chronic Toxicity Cat. 2

Hazard Statement Codes: H315, H318, H412

Amino Silicone

102782-92-3

(0.6-1.9%)

NOTIFIED EU ECHA CLASSIFICATION:

Classification: Skin Irritation Cat. 2, Eye Damage Cat. 1A

Hazard Statement Codes: H315, H318

Nonyl Phenol

Ethoxylate

9016-45-9

(0.3-0.6%)

NOTIFIED EU ECHA and SELF-CLASSIFICATION:

Classification: Acute Oral Toxicity Cat. 4, Skin Irritation Cat. 2, Eye Irritation Cat. 2A, Aquatic Chronic Toxicity Cat. 2

Hazard Statement Codes: H302, H315, H319, H411

Water and other trace components

Balance

Classification: Not Applicable

See Section 16 for full text Hazard and Precautionary Statements

4. FIRST-AID MEASURES

PROTECTION OF FIRST AID RESPONDERS: Rescuers should be taken for medical attention if necessary. Remove or cover gross

contamination to avoid exposure to rescuers.

DESCRIPTION OF FIRST AID MEASURES: Contaminated individuals must seek medical attention if any adverse effect occurs. Take

a copy of label and SDS to physician or health professional with the contaminated individual.

Skin Exposure: If this product contaminates the skin and irritation develops, immediately begin decontamination with soap and water. Remove

exposed or contaminated clothing, taking care not to contaminate eyes. The contaminated individual must seek medical attention if adverse effects

continue after flushing.

Summary of content (10 pages)

PAGE 1
SAFETY DATA SHEET Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS 2015 (HPR-GHS) and the Global Harmonization Standard 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING PRODUCT IDENTIFIER PRESERVA® CRETE Aqueous Silicon Emulsion None Sealing Concrete TRADE NAME (AS LABELED): CHEMICAL NAME/CLASS: SYNONYMS: PRODUCT USE: SUPPLIER OF THE SAFETY DATA SHEET U.S. SUPPLIER/MANUFACTURER'S NAME: ADDRESS: Preserva Products Ltd.
PAGE 2
Eye Exposure: If this product enters the eyes, open victim's eyes while under gently running water. Use sufficient force to open eyelids. Have victim "roll" eyes. Minimum flushing is for 20 minutes. The contaminated individual must seek medical attention if adverse effect occurs after flushing.
PAGE 3
4. FIRST-AID MEASURES (Continued) DESCRIPTION OF FIRST AID MEASURES (continued): Inhalation: If vapors, mists, or sprays of this product are inhaled, remove victim to fresh air. If necessary, use artificial respiration to support vital functions. Seek medical attention if adverse effect occurs after removal to fresh air. Ingestion: If this product is swallowed, CALL PHYSICIAN OR POISON CONTROL CENTER FOR MOST CURRENT INFORMATION. DO NOT INDUCE VOMITING, unless directly by medical personnel.
PAGE 4
7. HANDLING and STORAGE (Continued) CONDITIONS FOR SAFE STORAGE: Product should be stored in a sealed corrosion-resistant container. Keep container tightly closed when not in use. Empty containers may contain residual amounts of this product; therefore, empty containers should be handled with care. Store away from incompatible materials (see Section 10, Stability and Reactivity). Material should be stored in secondary containers, as appropriate.
PAGE 5
10. STABILITY and REACTIVITY CHEMICAL STABILITY: Stable under conditions of standard temperature and pressure. DECOMPOSITION PRODUCTS: Combustion: Carbon, nitrogen and silicone oxides, phenol, ethylene glycol, formaldehyde, formic acid, glyoxal, dioxalane and ammonia. Hydrolysis: None known. MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: This product would be incompatible with strong oxidizing agents. POSSIBILITY OF HAZARDOUS REACTIONS/POLYMERIZATION: Will not occur.
PAGE 6
ENVIRONMENTAL EXPOSURE CONTROLS: Controls should be engineered to prevent release to the environment, including procedures to prevent spills, atmospheric release and release to waterways.
PAGE 7
13. DISPOSAL CONSIDERATIONS WASTE TREATMENT/DISPOSAL METHODS: It is the responsibility of the generator to determine at the time of disposal whether the product meets the criteria of a hazardous waste per regulations of the area in which the waste is generated and/or disposed of. Waste disposal must be in accordance with appropriate Federal, State, and local regulations.
PAGE 8
16. OTHER INFORMATION (Continued) GLOBAL HARMONIZATION SYSTEM CLASSIFICATION (continued): Precautionary Statements (continued): Storage: P403 + P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up. Disposal: P501: Dispose of contents/containers in accordance with all local, regional, national and international regulations. Hazard Symbols: GHS07 REVISIONS DETAILS: New. REFERENCES AND DATA SOURCES: Contact the supplier for information.
PAGE 9
DEFINITIONS OF TERMS (Continued) HAZARDOUS MATERIALS IDENTIFICATION SYSTEM HAZARD RATINGS (continued): NATIONAL FIRE PROTECTION ASSOCIATION HAZARD RATINGS (continued): PHYSICAL HAZARD (continued): 3 (continued): Oxidizers: Packing Group I Solids: any material that, in either concentration tested, exhibits a mean burning time less than the mean burning time of a 3.:2 potassium bromate/cellulose mixture.
PAGE 10
PRESERVA® CRETE (Confidential) SDS PAGE 10 OF 7