Installation Guide

©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
[e-mail]
58537
1. Turn off water supply.
2. Using wrench, unscrew bonnet nut
under the handle.
3. Unthread stem from valve body.
4. Remove worn washer and packing,
and replace with new washer and packing.
5. Reassemble valve in reverse order.
6. Turn on water and check for leaks.
Tools needed for installation: • Adjustable Wrench
WARNING: Reproductive Harm - www.P65warnings.ca.gov
Installation Instructions