Installation Guide

©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
[e-mail]
58474
Installation Instructions
1. Turn off water supply.
2. Remove handle cap and retaining screw.
3. Remove handle by pulling straight out.
4. Remove old ange by unthreading ange screws.
5. Unthread retainer nut
6. Install new retainer nut
7. Install new ange.
8. Install new handle on stem and tighten with retaining screw.
9. Turn on water supply.
WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov
©2018 The Agency ACBH. PO Box 178,
West Grove, PA 19390. All Rights Reserved.
The Agency ACBH assumes no responsibility
for failure due to improper use. PartsmasterPro
is a registered trademark of The Agency ACBH
Posi-Temp, Moentrol, Chateau, and Legend are
trademarks of Moen Incorporated.
www.partsmasterpro.com
Made in Taiwan