MSDS

file:///C|/Documents%20and%20Settings/Ann%20Marie/Desktop/HD%20SO%20MISC%20PICTURES/RectorSeal%2520Hi-Temp%20MSDS.txt
Section 6 -- ACCIDENTAL RELEASE MEASURES
-----------------------------------------------------------------------------
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Scrape up spills
To prevent footing hazard. Avoid flushing into sewers, drains, waterways and
soil. Wear protective clothing during clean up.
=============================================================================
Section 7 -- HANDLING AND STORAGE
-----------------------------------------------------------------------------
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in cool place. Keep
container closed and upright when not in use.
OTHER PRECAUTIONS: Provide adequate ventilation during use to keep ambient
air acetic vapor concentration below TLV or use respirator protection.
COMMENT: When heated to temperatures above 302F(150C) in the presence of
air, product can form formaldehyde vapors. Formaldehyde is a potential
cancer hazard; a known skin and respiratory sensitizer; and an irritant to
the eyes, nose, throat, skin, and digestive system. Safe handling conditions
may be maintained by keeping vapor concentrations within the OSHA Permissible
exposure limit for formaldehyde. Avoid prolonged or repeated contact with
skin or clothing. Empty containers may contain residues; treat as if full
and observe all products precautions. Do not reuse empty containers.
KEEP OUT OF REACH OF CHILDREN.
=============================================================================
Section 8 -- EXPOSURE CONTROLS/PERSONAL PROTECTION
-----------------------------------------------------------------------------
RESPIRATORY PROTECTION (SPECIFY TYPE): In confined, poorly ventilated areas,
use NIOSH/MSHA approved air purifying or supplied air respirators until
vapors from cured product have dissipated.
VENTILATION - LOCAL EXHAUST: Maintain air flow during application.
SPECIAL: N/A
MECHANICAL (GENERAL): Acceptable.
OTHER: N/A
PROTECTIVE GLOVES: Coveralls recommended.
EYE PROTECTION: Safety glasses (ANSI Z-87.1 or equivalent)
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Coveralls recommended.
WORK/HYGIENIC PRACTICES: Where use can result in skin contact, wash exposed
areas thoroughly before eating, drinking, smoking, or leaving work area.
Launder contaminated clothing before reuse.
=============================================================================
Section 9 -- PHYSICAL AND CHEMICAL PROPERTIES
-----------------------------------------------------------------------------
BOILING POINT: 212 F (100 C) @ 760mm Hg
SPECIFIC GRAVITY (H20 = 1): 1.04
VAPOR PRESSURE (mm Hg): < 5mm Hg
MELTING POINT: N/A
file:///C|/Documents%20and%20Settings/Ann%20Mari...ISC%20PICTURES/RectorSeal%2520Hi-Temp%20MSDS.txt (3 of 6) [4/14/2011 2:14:30 PM]