Instructions / Assembly

Label Picture Description QTY

1 Left Leg with Arm 1

2 Right Leg with Arm 1

3 Cross Bar 1

Backrest Panel (Top

end with Tag)

5 Seat Panel 1

Rocking Chair

CAUTION : This Rocking Chair is NOT a TOY.

Keep your child / children at bay during the assembly process.

Caution: You must read this before you proceed

PAGE 1
Caution: You must read this before you proceed Rocking Chair CAUTION : This Rocking Chair is NOT a TOY. Keep your child / children at bay during the assembly process.
PAGE 2
Label Picture Description QTY G Blot with Flat Washer(M6*18MM) 13 H Bolt Cap 13 I Allen Key 1 Before Beginning Assembly:
PAGE 3
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Attach Backrest Panel(4) to Right Leg with Arm(2) using Bolt with Flat Washer(A) and Allen Key(C). Do NOT tighten the Bolts. NOTE: It is recommended that you have a partner to assist during the entire assembly process. Step 2 Attach Seat Panel(5) to Right Leg with Arm(2) using Bolt with Flat Washer(A) and Allen Key(C). Do NOT tighten the Bolts.
PAGE 4
Step 3 Attach Cross Bar(3) to the Right Leg with Arm using Bolt with Flat Washer(A) and Allen Key(C). Do NOT tighten the Bolts. Step 4 Attach Cross Bar(3), Backrest Panel(4) and Seat Panel(5) to the Left Leg with Arm (1)using Bolt with Flat Washer(A) and Allen Key(C). Then fully tighten all Bolts at all joints. Push Bolt Caps(B) onto the top of the Bolts by hand.
PAGE 5
Step 5 Turn Chair right side up. Your Rocking Chair is ready for use. Caution: The Chair should be used on a smooth, level suface. Children should be supervised at all times when using the Rocking Chair.
PAGE 6