Installation Guide

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/8/2017 . This information is updated periodically
and should not be relied upon after 2 years from 3/8/2017 . Please visit OZCOBP.com to get current information.
bottom side option
typical base assembly (5XX08 shown)
top side option
2 methods for isolating non decay resistant posts from moisture
Select the option that best suits your application1.
Add 2" Heavy Duty Timber Bolt Washer #566802.
Continue with standard installation3.
Installation Instructions, Post
Base (optional mounting)
1
mounting)
Installation Instructions, Post Base (optional
Decay Resistance of Post
Wood columns shall be approved wood of
natural decay resistance or approved
pressure-preservative-treated wood
Exception: Columns exposed to the weather
when supported by concrete piers or metal
pedestals projecting 1" above a concrete floor
or 6" above exposed earth and the earth is
covered by an approved impervious moisture
barrier.
IRC 2009/2012 Section R317.1.4 IBC
2009/2012 Section 2304.11.2.7