Specification

TECHNICAL SPECIFICATION
PB 15,9 – 17,5 – 19,1 mm – Carb 2 M2
CQ.: 001
Rev.: 001
Date: January, 11th,
2017.
The parameters indicated in this Certificate of Quality refer to values specified by ANSI A208.1-2016. The tests results performed
by BERNECK, according to standard procedures and methodologies, are listed below.
BERNECK PRODUCTS
International System
Imperial System
Properties
Units
Specification
Units
Specification
Thickness
mm
± 0,1
inch
± 0,004
Length and Width (Maximum)
mm
± 2,0
inch
± 0,080
Squareness (Maximum)
mm/m
3,0
inch/ft
0,036
Linear Expansion (Maximum)
%
0,40
%
0,40
Density ¹
Kg/m³
640 ± 30
Lb/ft³
39,95 ± 1,87
Thickness Swelling ¹ (Maximum)
%
18
%
18
Internal Bond (Minimum)
N/mm²
Min 0,40
psi
Min 58
Modulus of Rupture (Minimum)
N/mm²
Min 13,0
psi
Min 1885
Modulus of Elasticity (Minimum)
N/mm²
Min 2.000
psi
Min 290.100
Screw Holding - Face
N
Min 900
lb
Min 202
Screw Holding - Edge
N
Min 800
lb
Min 180
Free Formaldehyde Content
(Maximum)
ppm
Max 0,09
ppm
Max 0,09
¹ According to ANSI A208.1-2016, these analysis are not required for M2 grade
Contact Information:
Phone number: ([phone]
e-mail: [e-mail]
Approval
Mario Fabiano Borin
Quality and Development Manager
Prepared by
Ivan Pallone
Development and Process Manager