Datasheet

Providing Solutions in Pressure Sensitive Films
________________________________________________________________________________________________________________________________________________________________________________________
Product Construction Sheet
FLEXmount™ DFM 500 CLEAR V-23 80B PFM V-23 90 PFW
GENERAL DESCRIPTION:
This is a clear polyester film coated on both sides with a permanent pressure sensitive acrylic
adhesive and backed with a two side poly coated semi bleached mando release liner (80B PFM) on one
side and two side poly coated lay flat release liner (90 PFW) on second side.
-----------------------------------------------------------------------------------------------------
PRODUCT DATA VALUE TEST METHOD
-----------------------------------------------------------------------------------------------------
PHYSICAL PROPERTIES
Thickness 80B PFM Liner: 125 +/- 10 % ASTM D 3652
(micron) Adhesive: 23-25 +/- 3
Film: 125 +/- 10 %
Adhesive: 23-25 +/- 3
90 PFW Liner: 175 +/- 10 %
-----------------------------------------------------------------------------------------------------
ADHESION PROPERTIES**
Average
Adhesion from (N/m)
Stainless Steel 594 FTM 1 (Modified for
Acrylic 627 72 hr dwell time)
Glass 649
Expected Shear 40 FTM 8
(hours)
Tack (gm/sq cm) 700 ASTM D 2979
** For guidance only
This data is based on limited test results due to the custom nature of this product, not to
be used for setting specifications.
-----------------------------------------------------------------------------------------------------
EXPECTED EXTERIOR LIFE Depends on substrate, adhesive is suitable for outdoor use.
-----------------------------------------------------------------------------------------------------
SERVICE TEMPERATURE RANGE -40`C to 150`C
-----------------------------------------------------------------------------------------------------
MINIMUM APPLICATION TEMPERATURE 10`C
-----------------------------------------------------------------------------------------------------
STORAGE STABILITY Two years stored at 21`C and 50%
RH
-----------------------------------------------------------------------------------------------------
* FLEXmount is a trademark of FLEXcon Company, Inc. 30/10/2002
Product Performance and Suitability
All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not
reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you
have indicated your contemplated use and shall in no event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible
for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of FLEXcon is
authorized to give any warranty, guaranty, or make any representation in addition or contrary to the above.
________________________________________________________________________________________________________________________________________________________________________________________
FLEXcon, 1 FLEXcon INDUSTRIAL PARK, SPENCER, MA 01562-2642 PHONE [phone] FAX [phone]