Instructions / Assembly

ManualsBrandsUnbranded ManualsFountain Spray HeadsLarge Fountain Nozzle Kit

Pond Nozzle Kit

ITEM #NLFTN

PACKAGE CONTENTS

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or

operate the product. Contact customer service for replacement parts.

• Estimated Assembly Time: 5 minutes

• No tools required for assembly.

ASSEMBLY INSTRUCTIONS

1. Connect the two extension tubes (A) with the coupler (B).

Fig. 1

NOTE: Use the coupler (B) if no spitters are to be used.

Fig. 1

Part

Description

Quantity

Extension tube

Coupler

Adapter for 1/2” outlets

Adapter for 3/4” outlets

3-tier fountain head

Trumpet fountain head

Waterbell fountain head

Foam-jet fountain head

Lower fountain head nozzle

Diverter valve

REMINDER

CALL 1-888-755-6750

BEFORE RETURNING TO STORE.

Questions, problems, missing parts? Before returning

to your retailer, call our customer service department at

1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or

email us at customercare@thepondboss.net. Or visit our

website www.thepondboss.net.

PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.

WWW.THEPONDBOSS.NET

Summary of content (4 pages)

PAGE 1
Pond Nozzle Kit ITEM #NLFTN REMINDER CALL 1-888-755-6750 BEFORE RETURNING TO STORE. Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or email us at customercare@thepondboss.net. Or visit our website www.thepondboss.net.
PAGE 2
. Connect the extension tubes (A) to the diverter valve (J). Make sure the arrow on the valve is positioned as shown and the diverter valve is connected as shown. Fig. 2 A NOTE 1: Use diverter valve (J) to simultaneously run a spitter and fountain head from one pump. J Water flow A Fig. 2 3. For 1/2 in. tubing, connect the tubing onto the second output of the diverter valve. Connect the other end of the tubing to a spitter or other water feature. Fig.
PAGE 3
6. For the PF350, PP225, PP350, PP575, use the 3/4” adapter to connect the pump to the extension tubes. Fig. 6 A A D D PF320 PP225&PP350& PP575 Fig. 6 7. For the PF500, use the 5/8” adapter to connect the fountain head kit onto the pump. Fig. 7 Extension tube A NOTE: 5/8” adapter is NOT INCLUDED. 5/8” adapter PF500 Fig. 7 CARE AND MAINTENANCE • Periodically disassemble the fountain head kit and clean the parts. • Use a cloth or soft brush with warm, soapy water. Be sure to use biodegradable soap.
PAGE 4
LIMITED WARRANTY All pumps and electrical products are warranted to the user against defective material and workmanship, under normal working conditions. This warranty period begins on the date of purchase by the original purchaser. Unless otherwise specified all pond boss® electrical products are warranted to the user against defective material and workmanship, under normal working conditions for 1 year from the date of purchase. • Pond and Waterfall pumps are warranted for 3 years.