SDS

Titebond II Premium Wood Glue
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Store between the following temperatures: -12.222 to 32.222°C (10 to 90°F). Store in
accordance with local regulations. Store in original container protected from direct
sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see
Section 10) and food and drink. Keep container tightly closed and sealed until ready for
use. Containers that have been opened must be carefully resealed and kept upright to
prevent leakage. Do not store in unlabeled containers. Use appropriate containment to
avoid environmental contamination.
:
:
Protective measures
Put on appropriate personal protective equipment (see Section 8).
:
Precautions for safe handling
aluminium chloride, anhydrous
OSHA PEL 1989 (United States, 3/1989). Notes: as Al
TWA: 2 mg/m³, (as Al) 8 hours.
NIOSH REL (United States, 10/2013). Notes: as Al
TWA: 2 mg/m³, (as Al) 10 hours.
Section 8. Exposure controls/personal protection
Ingredient name
Exposure limits
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:
Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Control parameters
Individual protection measures
Occupational exposure limits
Consult local authorities for acceptable exposure limits.
aluminium chloride, anhydrous
NOM-010-STPS (Mexico, 9/2000).
LMPE-PPT: 2 mg/m³ 8 hours.
Canada
Mexico
Ingredient
Exposure limits
Occupational exposure limits
Ingredient
List name
ppm
mg/
m³
Other
ppm
mg/
m³
Other
ppm
mg/
m³
Other
Notations
aluminium chloride, anhydrous, as
Al
AB 4/2009
-
2
-
-
-
-
-
-
-
[3]
QC 1/2014
-
2
-
-
-
-
-
-
-
[A]
TWA (8 hours)
STEL (15 mins)
Ceiling
[3]Skin sensitization
Notes:
[A]as Al
Occupational exposure limits
United States
Date of issue/Date of revision
:
5/22/2015.
Version
:
4
4/10