Data Sheet

2
Rev. 12/19
ProLine H-800 Specifications
*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for
sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
PROLINE H800, MODEL 31050TE
ENGINE
Yanmar; 3-cylinder, liquid-cooled, diesel. Rated Power 24.7 hp (18.4 kW) @ 3000 rpm, Gross Power 24.7 hp (18.4 kW) @ 3000 rpm. High idle: 3200 rpm;
Displacement: 1.266 liter. Remote mounted 5” (12.7cm) Virgis air filter.
FUEL CAPACITY
10.8 gallons (41 liters) diesel
TRACTION DRIVE
Engine-mounted hydrostatic transmission powering four hydraulic wheel motors providing dual-diagonal full-time all-wheel drive.
TIRES
Front: 23 x 10.5-12 turf tires. Rear: 18 x 7.5-8 turf tires.
AIR CLEANER
Dry, replaceable primary and safety element.
INSTRUMENTATION
Indicators: glow indicator, battery discharge, low engine oil pressure, blocked air cleaner, grass collector raised, parking brake on, work light on, headlight on, hazard
light on. Gauges: hour meter/service indicator, engine temperature gauge, fuel tank level gauge with low level lamp.
CONTROLS
Ignition switch, throttle lever, single foot-operated traction pedal, service brake with parking brake latch, switch for adjusting the height of cut.
GROUND SPEED
Transport & Mowing: 0-9.3 mph (0-15 km/h), continuously variable. Reverse: 6.2 mph (0-10km/hr)
RADIATOR
Smart Cool®. Electric with automatic or manual reversing for cleaning.
MAIN FRAME
All welded formed-steel frame
BRAKES
Service brake: Traction pedal provides dynamic braking through hydrostatic transmission. Parking brake: Foot pedal actuates drum brakes on front wheels. Foot
operated lock retains pedal in actuated position.
STEERING
Rear axle with hydraulic steering. Adjustable tilt steering wheel with 2 ⅔ turns lock to lock.
ELECTRICAL
55A alternator with P terminal. Battery: 12V, 55B24
INTERLOCKS
Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, engine stops. If operator leaves
the seat with the unit out of neutral, engine stops. Engine stops if parking brake is engaged and traction pedal not in neutral.
SEAT
Low profile mechanical suspension, retractable seat belt
LIGHTS
Work and road lights standard
HYDRAULICS/COOLING
2.5 gallon (9.5 liter) capacity, fan-cooled oil cooler, high pressure cartridge filter
PTO CLUTCH
Belt-driven, Ogura electromagnetic clutch, with magnetic blade brake, powering drive shaft to gearbox on deck. Deck shuts off automatically when grass collector is full.
ROLLOVER PROTECTION
2-post standard foldable ROPS, meets ISO 21299
SAFETY
EN ISO 5395 (CE), ANSI B71.4-2017
CERTIFICATION
Certified to meet the CE Machinery Directive 2006/42/EC. Certified to meet Electromagnetic Compatibility Directive 2014/30/EU, Physical Agents Directive (Vibration)
2002/44/EC, Outdoor Noise Directive 2000/14/EC, and Battery Directive 2000/66/EC. Meets emissions regulations EU Stage V. Reg. Compliance Mark (RCM) AS NZS CISPR
12:2009, Canadian EMC ICES-002, EAC
WARRANTY
Two-year limited warranty. Refer to the operator’s manual for further details.
CUTTING DECK
WIDTH OF CUT
50” (1.3 m)
HEIGHT OF CUT
0.8-4.3” (20-109mm), Infinitely variable, hydraulically-adjusted, remotely controlled from operator’s station
DECK CONSTRUCTION
Formed and welded deck with front bull-nose bumper.
DISCHARGE
Direct grass collection.
SPINDLE ASSEMBLY
1" (25mm) diameter spindles mounted in two greaseable bearings.
CUTTER DRIVE
PTO driven gearbox with spiral bevel gears, “B” section belt drive to all spindles.
BLADES
Front: heat-treated steel; Counter-rotating: Two heat-treated blade segments per spindle, bolted to integral fan disc
BLADE TIP SPEED
80.7 m/s (15,900 ft/min) +/- 2% at 3,210 engine RPM
DECK SUSPENSION
Two caster wheels in front, lift arm links in rear
CASTOR WHEELS
Two, smooth, semi-pneumatic 9.00x3.50-4
BELT IDLER
Adjustable, spring-loaded idler
DECK SKID
Replaceable, bolt-on, non-marking UHMW skid on both sides.
DECK ANTI-SCALP ROLLERS
Front nose roller and two rear side rollers
DECK COVERS
Molded plastic with ¼ turn fasteners and retention bolt
CUTTING DECK DEPTH
4.5” (114mm)
CERTIFICATION
European standard per EN ISO 5395, ANSI B71.4-2017, CE approved.
MOWING RATE
Mow up to 3 acres (12,000 m
2
) per hour