Instructions / Assembly

SPORTS BENCH WITH COOLER

Assembly Instructions

THANK YOU FOR YOUR PURCHASE.

WE VALUE OUR CUSTOMERS AND WANT TO BE SURE YOU ARE SATISFIED WITH YOUR PRODUCT.

IF YOU HAVE ANY QUESTIONS OR CONCERNS OR YOU ARE NOT COMPLETELY SATISFIED, PLEASE CONTACT OUR OFFICE AT 1-800-906-1639.

Assembly:

1. Remove sports bench from the carry bag.

2. Open the sport bench by pulling both sides on the bench until it extends.

3. Extend the bench until it is almost fully open. Allow some slack to attach the cooler

4. Take the cooler and attach it to the 4 poles in the center of the bench.

The cooler should have a hole at each corner to match the poles.

5. Once the cooler is attached, fully extend the bench so that the fabric is taut

After Use:

1. Open the drain on the bottom of the cooler to drain the water. Remove any drinks or ice from the cooler

2. Allow the cooler and bench to fully dry before storing to prevent cold or mildew

3. Remove the cooler from the bench

4. Push both sides of the bench together until it is closed

5. Store cooler and seater in the carry bag when not in use

Each seat has a 200 lb weight capacity. Do not exceed this weight.

WARNING: Inspect the bench before use to ensure there is no damage. If the bench is damaged or torn,

discontinue use to prevent injury

PAGE 1
SPORTS BENCH WITH COOLER Assembly Instructions Assembly: 1. Remove sports bench from the carry bag. 2. Open the sport bench by pulling both sides on the bench until it extends. 3. Extend the bench until it is almost fully open. Allow some slack to attach the cooler 4. Take the cooler and attach it to the 4 poles in the center of the bench. The cooler should have a hole at each corner to match the poles. 5. Once the cooler is attached, fully extend the bench so that the fabric is taut After Use: 1.