Data Sheet

2
Rev. 2/21
Pro Core
®
648 Specifications*
The ProCore 648 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
PROCORE 648, MODEL 09200
ENGINE
Kohler®, 2-cylinder, air-cooled, 23 hp (17.1 kW) gross, 19 hp (14.2 kW) net @ 3000 rpm, 41 cu-in. (674 cc) displacement. Dry, large capacity, replaceable element air
filter. External spin-on oil filter, 2-quart (1.9-liter).
FUEL CAPACITY
7.5 gallons (28.4 liter), gasoline.
ELECTRICAL
12-volt, 15 amp regulated charging alternator/generator. BCI Group No.: U1 battery, 300 cold cranking amps @ 0°F. Micro-processor logic control.
DRIVETRAIN
3WD, Series-Parallel hydrostatic, closed loop. Variable displacement piston type pump. High-torque, low-speed wheel motor drive.
HYDRAULIC SYSTEM
Remote spin-on filter. 3.0- gallon (13.2 liter), Mobilfluid 424 (std.) or Mobil EAL biodegradable (opt.).
CONSTRUCTION
Welded steel frame with cast crank and arm assembly.
TIRES
20 x 10-10, 2-ply rated, smooth tread, tubeless, inflated to 12 psi, de-mountable rims.
BRAKES
Dynamic braking through hydrostatic transmission. Hand actuated parking brake.
GROUND SPEED
Transport: Aerating:
Forward: 0-3.5 mph (0-6.4 km/h), variable Detent 1: 1.5" (3.8 cm) spacing (2 x 1.5" pattern, 4-tine head)
Reverse: 0-2.0 mph (0-3.2 km/h), variable Detent 2: 2.0" (5.1 cm) spacing (2 x 2.0" pattern, 4-tine head)
Aerating: 0.77-1.51 mph (1.23-2.42 km/h), variable Detent 3: 2.5" (6.4 cm) spacing (2 x 2.5" pattern, 4-tine head)
Detent 4: 3.0" (7.6 cm) spacing (2 x 3.0" pattern, 4-tine head)
INSTRUMENTATION
Hour meter, tachometer.
CONTROLS
Hand controlled bail on handle, coring head lifts and de-clutches if control bail is released. Parking brake and transaxle shift on handle. Coring head raise/lower
switch on handle console. Side console with ignition, aeration spacing, manual ground follow and system reset. Aeration depth adjustment on coring head. Throttle
and choke on engine.
INTERLOCKS
Clutch latch, traction neutral, coring head raise/lower.
DIMENSIONS
Length Width Height Wheelbase Track Width Weight (dry) Ground Clearance
104.5" (265.4 cm) 50.12" (127.3 cm) Head Raised 45" (114.3 cm) 44.5" (113 cm) 38.3" (97.3 cm) 1,590 lbs. (722 kg) 4.75" (12.1 cm)
Head Lowered 36.5" (92.7 cm)
Top of Handle 41.0" (104.1 cm)
CERTIFICATION
ANSI B71.4-2017. CE & EU machinery directives.
WARRANTY
Two-year or 500 hour limited warranty. Refer to the Operator’s Manual for further details.
TINE HEADS
TINES
Model Description Lateral Spacing Mount Diameter
09739 Needle Tine 1.6" (2.8 cm) N/A
09736 Mini-Tine (2 rows of 5) 1.6" (2.8 cm) 3/8"
09737 Mini-Tine (1 row of 6) 1.3" (3.3 cm) 3/8"
09794 3 Tine 3/4" 2.6" (6.8 cm) 3/4"
09796 4 Tine 3/4" 2" (5.1 cm) 3/4"
09797 3 Tine 7/8" 2.6" (6.8 cm) 7/8"
09719 QuickChange
®
4-Tine 2" (5.1 cm) 3/4" or 7/8"
ACCESSORIES
Model Description
09220 Windrower Kit
09225 Tire Scrapers
09234 Rear Roller Kit
114-0590-01 QuickChange
®
Tool
TINES
Over 100 Titan Tines in multiple varieties available from Toro
See the Toro Titan Tines Catalog or visit www.toro.com/titantines