Datasheet

Features
● Used in communication equipments, switching power supply, etc.
●
Safety vent construction design
Item Performance Characteristics
O
p
eratin
g
Tem
p
erature Ran
g
e
-40 to +105℃ -25 to +105℃
Rated volta
g
e Ran
g
e
6.3 to 100 VDC 160 to 450 VDC
Ca
p
acitance Ran
g
e
0.1 to 15000 uF 0.47 to 470 uF
Ca
p
acitance Tolerance
±20%(120Hz, +20℃)
Leakage Current
(+20℃, max.)
I≦0.01 CV or 3(uA) After 1minute
whichever is greater measured
with rated working voltage applied.
I≦0.03 CV or 3(uA) After 1minute
with rated working voltage applied..
Dissipation Factor ( tanδ )
Working Voltage (VDC) 160 200 250 350 400 450
D.F.(%)max 15 15 16 20 20 20
For Capacitance > 1000uF , add 2% per another 1000uF
(+20℃, at 120Hz)
Working Voltage (VDC) 6.3 10 16 25 35 50 63 100
D.F.(%)max 23 20 16 14 12 10 10 10
Low Temperature Characteristics
(120Hz)
Impedance ratio max.
Working Voltage (VDC) 160 200 250 350 400 450
Z-25℃/Z+20℃
3 3 3 5 6 15
For Capacitance Value 1000uF , add 0.5 per another 1000uF for -25℃/+20℃
add 1 per another 1000uF for -40℃/+20℃
Working Voltage (VDC) 6.3 10 16 25 35 50 63 100
Z-25℃/Z+20℃
4 3 2 2 2 2 2 2
Z-40℃/Z+20℃
8 6 4 3 3 3 3 3
Load Life
Test conditions
Duration time : 5Ø~6Ø1000Hrs
8Ø~25Ø 2000Hrs
Ambient temperature:+105℃
Applied voltage: Rated DC working voltage
After test requirements:at+20℃
After test requirements:≦±20% of the initial measured value
Dissipation Factor: ≦200% of the initial specified value
Leakage current: ≦The initial specified value
Shelf Life
Test conditions
Duration time :500Hrs
Ambient temperature:+105℃
Applied voltage: None
After test requirements at +20℃: Some limits as Load life.
Pre-treatment for measurements shall be conducted after
application of DC working voltage for 30 minutes.
Multiplier for Ripple Current VS, Frequency Multiplier for Ripple Current VS, Temperature
Diagram of Dimensions: (Unit: mm)
Specifications
CAP (uF) \ HZ 50(60) 120 400 1K 10K 50-100K
CAP≦10
0.8 1.0 1.30 1.45 1.65 1.70
10<CAP≦100
0.8 1.0 1.23 1.36 1.48 1.53
100<CAP≦1000
0.8 1.0 1.16 1.25 1.35 1.38
Multiplier
1000<CAP 0.8 1.0 1.11 1.18 1.25 1.28
Temperature (℃)
45 60 70 85 105
Multiplier 2.10 1.90 1.65 1.40 1.00
Dφ 5 6.3 8 10 13 16 18 22 25
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10 12
dφ 0.5 0.6 0.8 1.0
LHK General Purpose, 105℃