SDS
SAFETY DATA SHEET
NOROX MEKP-925
Version
1.1
Revision Date:
07/10/2017
SDS Number:
600000000112
Print Date:
07/10/2017
5 / 23
Methods and materials for
containment and cleaning up
:
Contact with incompatible substances can cause
decomposition at or below SADT.
Clear spills immediately.
Suppress (knock down) gases/vapors/mists with a water spray
jet.
To clean the floor and all objects contaminated by this
material, use plenty of water.
Soak up with inert absorbent material.
Isolate waste and do not reuse.
Non-sparking tools should be used.
Local or national regulations may apply to releases and
disposal of this material, as well as those materials and items
employed in the cleanup of releases. You will need to
determine which regulations are applicable.
SECTION 7. HANDLING AND STORAGE
Technical measures
:
See Engineering measures under EXPOSURE
CONTROLS/PERSONAL PROTECTION section.
Advice on protection against
fire and explosion
:
Keep away from heat and sources of ignition. Use only
explosion-proof equipment. Keep away from combustible
material.
Advice on safe handling
:
Do not swallow.
Do not breathe vapors/dust.
Avoid contact with skin and eyes.
Avoid formation of aerosol.
Take precautionary measures against static discharges.
Never return any product to the container from which it was
originally removed.
Provide sufficient air exchange and/or exhaust in work rooms.
Avoid confinement.
Keep away from heat, hot surfaces, sparks, open flames and
other ignition sources. No smoking.
Smoking, eating and drinking should be prohibited in the
application area.
Wash thoroughly after handling.
For personal protection see section 8.
Protect from contamination.
Conditions for safe storage
:
Avoid impurities (e.g. rust, dust, ash), risk of decomposition.
Electrical installations / working materials must comply with
the technological safety standards.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Store in original container.
Keep containers tightly closed in a cool, well-ventilated place.
Store in accordance with the particular national regulations.
Materials to avoid
:
Keep away from strong acids, bases, heavy metal salts and
other reducing substances.