SDS

SARA Title III: Section 304 - CERCLA:
STYRENE MONOMER [1] (CAS# 000100-42-5),
METHYL METHACRYLATE [1] (CAS# 000080-62-6)
Reportable Quantity = 1,000 lb.
SARA Title III: Section 311/312 - Hazard Communication Standard (HCS):
This is classified as an IMMEDIATE HEALTH HAZARD, DELAYED HEALTH
HAZARD, FLAMMABILITY HAZARD, and REACTIVITY HAZARD under
the US Superfund Amendment and Reauthorization Act (Section 311/312)
SARA Title III: Section 313 Toxic Chemical List (TCL):
STYRENE MONOMER [1] (CAS# 000100-42-5),
METHYL METHACRYLATE [1] (CAS# 000080-62-6)
TSCA Section 8(b) - Inventory Status: All components of this material are
listed on the US Toxic Substances Control Act (TSCA) inventory.
TSCA Section 12(b) - Export Notification: This material does not contain any
components that are subject to the US Toxic Substances Control Act (TSCA)
Section 12(b) Export Notification requirements.
Canadian Inventory Status: All components of this material are listed on the
Canadian Domestic Substances List (DSL).
Canadian WHMIS: This material is classified by the Canadian Workplace
Hazardous Material Information System as: B2 (flammable liquid) D2A
(materials causing other toxic effects, very toxic material)
D2B (materials causing other toxic effects, toxic material)
F (dangerously reactive material)
California Proposition 65: WARNING: This product contains a chemical(s)
known to the State of California to cause cancer. Styrene Oxide, ethylbenzene
Additional Canadian Regulatory Information: The following chemicals are
listed on the WHMIS Ingredient Disclosure List:
Styrene Monomer (CAS# 100-42-5)
This product has been classified in accordance with the hazard criteria of the
Controlled Products Regulations and the MSDS contains all the information
required by the Controlled Products Regulations.
Section 16. Other information
Preparation Date: AUGUST 17, 2017
Disclaimer: This information is provided in good faith and is correct to the
best of HK Research Corporation’s knowledge as of the date hereof and is
designed to assist our customers; however, HK Research Corporation makes
no representation as to its completeness or accuracy. Our products are
intended for sale to industrial and commercial customers. We require customers
to inspect and test our products before use and to satisfy themselves as to
suitability for their specific applications. Any use which HK Research
Corporation’s customers or third parties make of this information, or any
reliance on, or decisions made based upon it, are the responsibility of such
customer or third party. HK Research Corporation disclaims responsibility for
damages, or liability, of any kind resulting from the use of this information.
THERE ARE NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING THOSE
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THIS
INFORMATION OR TO THE PRODUCT IT DESCRIBES. IN NO EVENT SHALL HK RESEARCH
CORPORATION BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.