Installation Guide

(J) Center top left rosette block #4 on top of left side fluted piece #3 and nail in place.
(K) Center top right rosette block (#6) on right fluted piece #7. Measure distance between top rosette blocks 4 and
6. Cut top fluted piece (#5) to this length and pre drill nail holes.
(L) Center top fluted piece against left top rosette, keeping piece level with top window jamb.
(M) Push right top rosette #6 tightly against both fluted pieces and nail in place.
(N) Fill nail holes and any gaps with putty or wood filler of matching color (use smallest amount possible for a neat
job). Then carefully touch up with paint or stain, only where necessary.