Datasheet

Page 3 of 7 QR-QE-20/2003.08.01
7
Contact
resistance
接觸阻抗
(ENR)
10% or less of the total resistance for
over 60°(60°included) carbon film
angle(Before the life test);
15% or less of the total resistance for
40 ° thru 60° carbon film
angle(Before the life test);
20% or less of the total resistance for
under 40°(40°included) carbon film
angle(Before the life test);
碳膜角度為 60°(含)以上時,全阻值的
10%以下(壽命測試前);
碳膜角度為 40°~60°時,全阻值的
15%以下(壽命測試前);
碳膜角度為 40°(含)以下時,全阻值的
20%以下(壽命測試前).
15% or less of the total resistance for
over 60°(60°included) carbon film
angle
(After the life test) ;
20% or less of the total resistance for
40° thru 60° carbon film angle
(After the life test) ;
25% or less of the total resistance for
under 40°(40°included) carbon film
angle (After the life test) ;
碳膜角度為 60°(含)以上時,全阻值的
15%以下(壽命測試后);
碳膜角度為 40°~60°時,全阻值的
20%以下(壽命測試后);
碳膜角度為 40°(含)以下時,全阻值的
25%以下(壽命測試后).
By the test angle of operation angle。
測試角度為全運轉角度。
8
Insulation
resistance
絕緣阻抗值
More than 100 MΩ
100 MΩ以上
Apply 250VDC to the individual terminals
and case.
金屬外殼與端子間加 DC250V 電壓
9
Withstand
voltage
耐電壓特性
Without arcing or breakdown
無損壞或弧光
Apply one minute of 250VAC to the
individual terminals and case.
在特定端子與外殼間加 AC250V 電壓 1 分鐘 .
二、MECHANICAL CHARACTERISTICS 機構特性
序號
NO.
項 目
ITEM
性 能
PERFORMANCE
測試條件
TEST METHODS AND REFERENCE