Instructions / Assembly

Step 10
419068 www.sauder.com/servicesPae 14
å
Insert the DRAWER SIDES (D30 and D31) at an angle
into the slot at each end of the DRAWER FRONT (H).
å
Slide the DRAWER BOTTOM (D982) into the
grooves in the DRAWER SIDES (D30 and D31) and
DRAWER FRONT (H).
å
Fasten the DRAWER BRACE (M67) to the
DRAWER FRONT (H). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D175) to the DRAWER
SIDES (D30 and D31) and DRAWER BRACE (M67). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S). Repeat
this step for the other DRAWERS.
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Surface with
HIDDEN CAM
12
34
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT roove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the roove.
Groove
H
M67
H
VIEW THE T-LOCK BOX VIDEO
D31
D982
D30
D30
D31
D175
Unfi nished
surface
H
D31
D30
1
2
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
30S
M67