Datasheet

ManualsBrandsUnbranded ManualsSensorsPressure sensor 0 bar up to 2.5 bar

BCM SENSOR TECHNOLOGIES BVBA

Brechtsebaan 2

B-2900 Schoten - Antwerpen, BELGIUM

Industriepark Zone 4,

Tel.: +32-3-238 6469

Fax: +32-3-238 4171

website: www.bcmsensor.com

email: sales@bcmsensor.com

The 131S is a silicone piezoresistive pressure

transmitter fitting most industrial pressure

measurement applications. Due its compact and

rugged design, this model is suitable for applications

hydraulics, pneumatics, test equipment, liquid level

measurement, compressor and control, etc.

With various options of process connection and

electrical interface, the 131S can be fitted into almost

all common systems.

The consisting of a stainless steel diaphragm,

wetted part, and housing can be used for

measurements involving hostile media compatible with

316 stainless steel. Featuring an inner-cavity process

connection, t

processing and control operations such as

pump

131S

he transmitter is specially designed to

measure pressure of gases or dilute fluids with

pressure reference of gauge, absolute, or sealed

gauge.

By selecting proper electrical interface, the 131S is

able to reach the environmental protection rating up to

IP67.

Description

Model 131S

General Purpose Pressure Transmitters

Features

Applications

measuring

pressure references:

gauge, absolute, and sealed gauge

accuracy up to 0.25%fs

selectable output:

4~20 mA (standard), 0.5~4.5V ratiometric and

others.

wide choice of process connection and

electrical interface

protection rating up to IP67

ranges: 0.35bar, ..., 600bar

mechanical engineering

hydraulics and pneumatics

compressor and pump systems

liquid level measurement

test equipment

Summary of content (5 pages)

PAGE 1
Model 131S General Purpose Pressure Transmitters Description The 131S is a silicone piezoresistive pressure transmitter fitting most industrial pressure measurement applications. Due its compact and rugged design, this model is suitable for applications of processing and control operations such as hydraulics, pneumatics, test equipment, liquid level measurement, compressor and pump control, etc.
PAGE 2
Model 131S General Purpose Pressure Transmitters Technical Data Parameter Specifications Units pressure medium viscous fluid or fluid with particles gauge bar 0~0.35, ~0.6, ~1, ~1.6, ~2.5, ~4, ~6, ~10, ~16, ~25, ~40 absolute bar 0~1, ~1.6, ~2.5, ~4, ~6, ~10, ~16, ~25, ~40 sealed gauge bar 0~10, ~16, ~25, ~40, ~60, ~100, ~160, ~250, ~400, ~600 overload pressure %fs 150 burst pressure %fs 200 mA 4~20 (standard) pressure references & ranges output signal V 0.5~4.
PAGE 3
Model 131S General Purpose Pressure Transmitters Dimensions electrical interface 1 3 1 2 3 2 4 DIN43650 (standard) circular connector with 4 pins PVC cable Φ5mm - 2 wires for current loop - 3 wires for voltage output - cable length (L) should be specified in ordering information electronics housing (casing) Notes: All dimensions are in mm. BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 Tel.: +32-3-238 6469 website: www.bcmsensor.
PAGE 4
Model 131S General Purpose Pressure Transmitters mechanical interface SW27 M20x1.5 SW27 G1/2 SW27 G1/4 SW27 G1/8 M12x1.5 male (standard) SW27 M20x1.5-c SW27 G1/2-c SW27 G1/2"(F) M20 x 1.5(F) SW27 G1/4"(F) NPT1/2 SW27 NPT1/4 SW27 1/4NPT(F) 1/4NPT(F) Notes: - All dimensions are in mm. - The mechanical interfaces and the electrical interfaces listed can be combined freely. - If other types of interfaces are on request, consult BCM.
PAGE 5
Model 131S General Purpose Pressure Transmitters Ordering Information position (pos.) 1: model 131S pos. 2: pressure ranges and references 4bar G, A, S 0.35bar G, A 40bar G, A, S 400bar S 6bar G, A, S 600bar S 0.6bar G, A 60bar S 10bar G, A, S 1bar G, A 100bar S 16bar G, A, S 1.6bar G, A 160bar S 25bar G, A, S 2.5bar G, A 250bar S pos. 3: output signal 4/20 mA (standard) 0.5/4.5 V (ratiometric) 0/5 V pos. 4: accuracy 0.25%fs (standard) G: gauge pressure A: absolute pressure S: sealed gauge 1/5 V I2C 0.