Datasheet

BCM SENSOR TECHNOLOGIES BVBA
Brechtsebaan 2
B-2900 Schoten - Antwerpen, BELGIUM
Industriepark Zone 4,
Tel.: [phone]
Fax: [phone]
website: www.bcmsensor.com
email: [e-mail]
Technical Data
The listed specifications and dimensions are subject to change without prior notice.
Notes:
1. For customized pressure ranges, consult BCM.
2. “fs” refers to full scale pressure or rated pressure.
3. Measured at full scale pressure.
4. Measured at 5Vdc excitation.
5. Accuracy = sqrt (non-linearity + hysteresis + repeatability ).
6. Calculated as a rate of output change between 25°C and 70°C, and normalized by the output at 25°C, when the sensor
is not temperature compensated.
7. Response time for a 0 bar to fs step change, 10% to 90% rise time.
Units
Specifications
Parameter
pressure medium
overload pressure
full scale output (fso)
zero offset
accuracy
long-term stability
bridge resistance
insulation resistance
compensated temperature range
operating temperature range
storage temperature range
temperature coefficient of zero offset
temperature coefficient of span
life time
response time
process sealing
pressure diaphragm
wetted parts material
filling oil
net weight
compatible with pressure diaphragm
-1~0, 0~0.1, ~0.35, ~0.7, ~1, ~2, ~3.5, ~7, ~10, ~20, ~35
0~1, ~2, ~3.5, ~7, ~10, ~20, ~35
0~70, ~100, ~200, ~350, ~600
250 (< 35bar), 150 ( 35bar)
≥ 60, option: 0.5~4.5 Vdc ratiometric, 4~20mA, I2C
5 (max. 10)
1 (max. 2)
≤ ±3
≤ ±0.25 (standard), ≤ ±0.5
≤ ±0.2
4~6
50 @50Vdc
-40 ~ +125
-40 ~ +125
≤ 1
O-ring (fluorine rubber)
4 colored flying wires, PVC, 100mm (standard)
flat-cable, 100mm
5 gold-plated copper pins, Ф0.45mm, 13mm
6 gold-plated copper pins, Ф0.45mm, 13mm
316L SS (standard), Tantalum
316L SS (standard), Hastelloy-C
silicone oil
~16.5 (≤ 100bar), ~25 (≥ 200bar)
≥
≤
≤
0~70 (standard)
≤ ±0.01 (> 0.7bar), ≤ ±0.015 ( 0.7bar)
≤ ±0.01 (> 0.7bar), ≤ ±0.015 ( 0.7bar)
4 conductor
bar
bar
bar
%fs
mV
Vdc
mA
mV
%fs
%fs/year
kΩ
MΩ
°C
°C
°C
fso
%fso/°C
cycles
ms
gram
% /°C
voltage
current
excitation
Notes
1
5
6
6
3 & 4
2
4
8
10
electrical interface
General conditions for measurements: media temp. = 25°C ±1°C, ambient temp. = 25°C ±1°C, humidity = 50%RH ±10%RH,
barometric pressure: 86~106 kPa, vibration = 0.1 g (1m/s/s) max.
22
2
pressure types
& ranges
gauge
absolute
sealed gauge
7
Model 101B(a19G)
Pressure Sensors