Datasheet

BCM SENSOR TECHNOLOGIES BVBA

Brechtsebaan 2

B-2900 Schoten - Antwerpen, BELGIUM

Industriepark Zone 4,

Tel.: +32-3-238 6469

Fax: +32-3-238 4171

website: www.bcmsensor.com

email: sales@bcmsensor.com

Description

Model 1531

Ceramic Tension Force Transducers

Features

Applications

Dimensions

type 1

type 2

type 1

type 2

Electrical Connections

1: sig.+

2: exc.-

3: sig.-

4: exc.+

with 2 holes of Φ2mm

to fix the end

- made from ceramics

- manufactured by thick film technology

- single bending beam of piezo-resistive working principle

- low profile with wide range of capacities from 0.1kg to 50kg

- low nonlinearity, hysteresis, and nonrepeatablity errors

- yarn break sensors or yarn tension monitors for yarn break detection

- tension force measurement in textile industry

- force measurement in factory automation sector

Model 1531 Tension Force Transducer is manufactured through BCM thick-film technology. The design of

1531 is optimized for its best performance to measure tension. The 1531 is specially developed to be

assembled into Yarn Break Sensor or Tight-End Sensor, suitable for break detection and tension monitoring in

textile industry.

1531, a metal or plastic housing, and either analogue

(1~5Vdc) or digital (I2C) output.

The Yarn Break Detector can be assembled from the

PAGE 1
Model 1531 Ceramic Tension Force Transducers Features - made from ceramics - manufactured by thick film technology - single bending beam of piezo-resistive working principle - low profile with wide range of capacities from 0.
PAGE 2
Model 1531 Ceramic Tension Force Transducers Technical Data Units Parameter capacity Specifications kg 0.1, 0.2, 0.3, 0.5, 0.7, 1, 2, 3, 5, 7, 10, 20, 30, 50 safe load limit ultimate overload %fs 150 %fs 200 output sensitivity at fs mV/V 3.3 zero unbalance mV ≤ ±0.5 accuracy %fs ≤ ±0.5 (standard), ≤ ±1 creep error (30 min.) %fs ±0.02 excitation Vdc 5, ..., 25 max. excitation voltage Vdc 30 input resistance kΩ 11 ±2 output resistance kΩ 9.
PAGE 3
Model 1531 Ceramic Tension Force Transducers Ordering Information position (pos.) 1: model 1531(type1) 1531(type2) pos. 2: capacities 1kg 0.1kg 2kg 0.2kg 3kg 0.3kg 5kg 0.5kg 7kg 0.7kg 10kg 20kg 30kg 50kg pos. 3: output sensitivity 3.3mV/V pos. 4: non-linearity or accuracy class 0.5%fs (standard) 1%fs pos. 5: customized specifications “(*)” is necessary only if any customized parameter is required, otherwise it is neglectable. pos.1 pos. 2 pos. 3 pos. 4 pos.