Data Sheet

ManualsBrandsUnbranded ManualsSensorsLoad cell 200 g up to 200 g

BCM SENSOR TECHNOLOGIES BVBA

Brechtsebaan 2

B-2900 Schoten - Antwerpen, BELGIUM

Industriepark Zone 4,

Tel.: +32-3-238 6469

Fax: +32-3-238 4171

website: www.bcmsensor.com

email: sales@bcmsensor.com

Description

Model 1531

Ceramic Force Transducers

Features

Applications

Dimensions

type 1

type 2

Schematic Diagram of

Mounting Arrangement

- made from ceramics

- manufactured by thick film technology

- single bending beam of piezo-resistive working principle

- low profile with wide range of capacities from 0.1kg to 0.4kg

- low nonlinearity, hysteresis, and nonrepeatablity errors

yarn tension measurement

yarn break detection

- tension or compression force measurement

Model 1531 force transducer is manufactured through BCM thick-film technology. The design of 1531 is

optimized for its best performance to measure tension.

This model is designed for yarn break detection or yarn tension measurement which is often necessary in

textile industry. For this purpose, the geometry of the 1531 is

, so as to be able to easily installed

in the twisting device or tufting equipment.

specially developed to be integrated into a yarn

break detector or a yarn tension transducer with a metal or plastic housing

With a sensor signal conditioning circuit, its output can be conditioned to either analogue (e.g.,1~5Vdc) or

digital (e.g.,I2C) signal output.

4xØ2.7 thru hole

fixed end

llooaaddeedd eenndd

loaded end

106

11.5

11.6

11.5

Ø3

3.5

solder pads

Summary of content (3 pages)

PAGE 1
Model 1531 Ceramic Force Transducers Description Model 1531 force transducer is manufactured through BCM thick-film technology. The design of 1531 is optimized for its best performance to measure tension. This model is designed for yarn break detection or yarn tension measurement which is often necessary in textile industry.
PAGE 2
Model 1531 Ceramic Force Transducers Electrical Connections 1: exc + 2: sig 3: exc 4: sig.+ solder pads 1 2 3 4 Technical Data Units Parameters capacity Specifications kg 0.1, 0.2, 0.3, 0.4 safe load limit ultimate overload %fs 120 %fs 150 output sensitivity at fs mV/V ≥ 2.5, ≥ 1.8 (capacity of 0.2kg), ≥ 0.9 (capacity of 0.1kg) zero unbalance mV ≤ ±1 accuracy %fs ±0.5 (standard), ±1 creep error (30 min.) %fs ±0.02 excitation Vdc 5, ..., 25 max.
PAGE 3
Model 1531 Ceramic Force Transducers Ordering Information position (pos.) 1: model 1531(type1) 1531(type2) pos. 2: capacities 0.1kg 0.2kg 0.3kg pos. 3: output sensitivity 0.4kg 2.5mV/V (capacity: 0.3kg or 0.4kg) 1.8mV/V (capacity: 0.2kg) 0.9mV/V (capacity: 0.1kg) pos. 4: non-linearity or accuracy class 0.5%fs (standard) 1%fs pos. 5: customized specifications “(*)” is necessary only if any customized parameter is required, otherwise it is neglectable. pos.1 pos. 2 pos. 3 pos. 4 pos.