Installation Guide

Install Risers (Without Heads)
Risers are designed to bring the sprinkler head up to ground height. A wide selection of risers
are available. Select the riser that best fits your needs.
Swing Joints &
Riser Flex
• Easy to adjust sprinkler height
• Resists impact and cracking
• Useful for placing heads in
hard to reach areas
Multi-Flex
™
Risers
• Comes in various lengths
•
Deflects impact
Aluminum Riser with
Adjustable Nozzle
• Adjusts in Height as Plant
Grows – 16" to 30"
• Easy Pattern Adjustment – 25°
to 360°
Flush Sprinkler Lines – Prior to Installing Heads
• Ensure PVC glue has dried adequately.
• Turn on the main line sprinkler valve.
• Manually turn on one valve at a time (see valve instruction booklet).
•
R
un eac
h valve for a few minutes.
Installing Heads and Testing
• Attach sprinkler heads to each riser and adjust the height to proper level.
• Place enough soil in the trench to stabilize heads but don't fill the trench.
• Manually turn on one valve at a time.
• Check for leaks.
Important: Adjust heads for proper spray pattern and check for adequate head to head coverage.
Installation
Sprinkler System Layout & Installation Guide
18
10
INSTALL RISERS & HEADS
S
wing Joint
Multi-Flex™
Adjustable Height
07WTM003045 53251-01 rE.qxd 3/2/07 2:30 PM Page 18